RE: [PATCH v2 1/4] usb: chipidea: add flag for imx hsic implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 
> > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> > index d858a82c4f44..d74a13d7c21c 100644
> > --- a/drivers/usb/chipidea/host.c
> > +++ b/drivers/usb/chipidea/host.c
> > @@ -28,6 +28,20 @@ struct ehci_ci_priv {
> >   	struct regulator *reg_vbus;
> >   };
> >
> > +/* This function is used to override WKCN, WKDN, and WKOC */ static
> > +void ci_ehci_override_wakeup_flag(struct ehci_hcd *ehci,
> 
> I think it would be better to rename this function to something like
> ci_ehci_clear_reg_bits() as it is completely generic and just clears some bits in reg.
> 
> And also remove the argument "set", as currently the only usage of this function is
> with set=false.
> 

Agree.

Peter

> > +		u32 __iomem *reg, u32 flags, bool set) {
> > +	u32 val = ehci_readl(ehci, reg);
> > +
> > +	if (set)
> > +		val |= flags;
> > +	else
> > +		val &= ~flags;
> > +
> > +	ehci_writel(ehci, val, reg);
> > +}
> > +
> >   static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
> >   {
> >   	struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -170,6 +184,11 @@
> > static int host_start(struct ci_hdrc *ci)
> >   			otg->host = &hcd->self;
> >   			hcd->self.otg_port = 1;
> >   		}
> > +
> > +		if (ci->platdata->notify_event &&
> > +			(ci->platdata->flags & CI_HDRC_IMX_IS_HSIC))
> > +			ci->platdata->notify_event
> > +				(ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT);
> >   	}
> >
> >   	return ret;
> > @@ -218,6 +237,8 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
> >   static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
> >   {
> >   	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> > +	struct device *dev = hcd->self.controller;
> > +	struct ci_hdrc *ci = dev_get_drvdata(dev);
> >   	int port;
> >   	u32 tmp;
> >
> > @@ -249,6 +270,9 @@ static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
> >   			 * It needs a short delay between set RS bit and PHCD.
> >   			 */
> >   			usleep_range(150, 200);
> > +			if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)
> > +				ci_ehci_override_wakeup_flag(ehci, reg,
> > +					PORT_WKDISC_E | PORT_WKCONN_E,
> false);
> >   			break;
> >   		}
> >   	}
> > diff --git a/include/linux/usb/chipidea.h
> > b/include/linux/usb/chipidea.h index 63758c399e4e..911e05af671e 100644
> > --- a/include/linux/usb/chipidea.h
> > +++ b/include/linux/usb/chipidea.h
> > @@ -60,9 +60,12 @@ struct ci_hdrc_platform_data {
> >   #define CI_HDRC_OVERRIDE_RX_BURST	BIT(11)
> >   #define CI_HDRC_OVERRIDE_PHY_CONTROL	BIT(12) /* Glue layer
> manages phy */
> >   #define CI_HDRC_REQUIRES_ALIGNED_DMA	BIT(13)
> > +#define CI_HDRC_IMX_IS_HSIC		BIT(14)
> >   	enum usb_dr_mode	dr_mode;
> >   #define CI_HDRC_CONTROLLER_RESET_EVENT		0
> >   #define CI_HDRC_CONTROLLER_STOPPED_EVENT	1
> > +#define CI_HDRC_IMX_HSIC_ACTIVE_EVENT		2
> > +#define CI_HDRC_IMX_HSIC_SUSPEND_EVENT		3
> >   	int	(*notify_event) (struct ci_hdrc *ci, unsigned event);
> >   	struct regulator	*reg_vbus;
> >   	struct usb_otg_caps	ci_otg_caps;




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux