Hi Andy
> > > > Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over
> > > > I2C interface.
> > > >
> > > > This UCSI I2C driver uses I2C bus driver interface for
> > > > communicating with Type-C controller.
>
> > > > + /*
> > > > + * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi
> > > control
> > > > + * register write will push response which must be cleared.
> > > > + */
> > > > + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
> > > > + if (status < 0)
> > > > + return status;
>
> (1)
>
> > > > + do {
> > > > + status = ccg_write(uc, CCGX_RAB_INTR_REG, &data,
> > > sizeof(data));
> > > > + if (status < 0)
> > > > + return status;
>
> (2)
>
> > > > +
> > > > + usleep_range(10000, 11000);
> > > > +
> > > > + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data,
> > > sizeof(data));
> > > > + if (status < 0)
> > > > + return status;
> > > > + } while ((data != 0x00) && count--);
> > >
> > > What's the significance of that count?
> > It is like a retry count to clear interrupt status.
> >
> > > Shouldn't you return -ETIMEDOUT if count == 0?
> > Yes. Good catch. Does the below fix looks ok?
>
> At least for me looks OK (I dunno why I missed that what Heikki found
> recently).
> Nevertheless, I have one more question about (1) and (2) above.
>
> Is it necessary to do one more read before do-while loop?
Yes, we need to read to get interrupt status bits and then write
them back to clear the status.
Thanks
Ajay
--nvpublic
>
> >
> > do {
> > status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
> > if (status < 0)
> > return status;
> >
> > usleep_range(10000, 11000);
> >
> > status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data));
> > if (status < 0)
> > return status;
> >
> > if (!data)
> > return 0;
> > } while (data && count--);
> >
> > return -ETIMEDOUT;
>
> --
> With Best Regards,
> Andy Shevchenko
>
