Add DT bindings document for Broadcom STB USB OHCI, EHCI and
XHCI drivers.
Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
---
.../devicetree/bindings/usb/brcm,bcm7445-ehci.txt | 22 +++++++++++++++++++++
.../devicetree/bindings/usb/brcm,bcm7445-ohci.txt | 22 +++++++++++++++++++++
.../devicetree/bindings/usb/brcm,bcm7445-xhci.txt | 23 ++++++++++++++++++++++
3 files changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ohci.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-xhci.txt
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.txt b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.txt
new file mode 100644
index 000000000000..824f4bf5d07c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.txt
@@ -0,0 +1,22 @@
+Broadcom STB USB EHCI controller
+
+Required properties:
+- compatible: should be "brcm,bcm7445-ehci"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+- phys: phandle + phy specifier pair
+ The specifier should be 0 for the OHCI/EHCI PHY
+
+Optional properties:
+- clocks: A phandle for the EHCI clock
+
+Example:
+
+ehci@f0b00300 {
+ compatible = "brcm,bcm7445-ehci";
+ reg = <0xf0b00300 0xa8>;
+ interrupts = <0x0 0x5a 0x0>;
+ interrupt-names = "usb0_ehci_0";
+ phys = <&usbphy_0 0x0>;
+ clocks = <&usb20>
+};
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ohci.txt b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ohci.txt
new file mode 100644
index 000000000000..de5a22b3d138
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ohci.txt
@@ -0,0 +1,22 @@
+Broadcom STB USB OHCI controller
+
+Required properties:
+- compatible: should be "brcm,bcm7445-ohci"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+- phys: phandle + phy specifier pair
+ The specifier should be 0 for the OHCI/EHCI PHY
+
+Optional properties:
+- clocks: A phandle for the OHCI clock
+
+Example:
+
+ohci@f0b00400 {
+ compatible = "brcm,bcm7445-ohci";
+ reg = <0xf0b00400 0x58>;
+ interrupts = <0x0 0x5b 0x0>;
+ interrupt-names = "usb0_ohci_0";
+ phys = <&usbphy_0 0x0>;
+ clocks = <&usb20>;
+};
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-xhci.txt b/Documentation/devicetree/bindings/usb/brcm,bcm7445-xhci.txt
new file mode 100644
index 000000000000..c41f3f8d836d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-xhci.txt
@@ -0,0 +1,23 @@
+Broadcom STB USB XHCI controller
+
+Required properties:
+- compatible: should be "brcm,bcm7445-xhci"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+- phys: phandle + phy specifier pair
+ The specifier should be 1 for the XHCI PHY
+
+Optional properties:
+- clocks: A phandle for the XHCI clock
+- usb3-lpm-capable: determines if platform is USB3 LPM capable
+
+Example:
+
+xhci_0_0: xhci@f0b01000 {
+ compatible = "brcm,bcm7445-xhci";
+ reg = <0xf0b01000 0x1000>;
+ interrupts = <0x0 0x5c 0x0>;
+ interrupt-names = "usb0_xhci_0";
+ phys = <&usbphy_0 0x1>;
+ clocks = <&usb30>;
+};
--
1.9.0.138.g2de3478
