From: Dmitry Bezrukov <dmitry.bezrukov@xxxxxxxxxxxx> Reset, stop callbacks, driver unbind callback. More register defines required for these callbacks. Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@xxxxxxxxxxxx> Signed-off-by: Igor Russkikh <igor.russkikh@xxxxxxxxxxxx> --- drivers/net/usb/aqc111.c | 48 ++++++++++++++++++++++ drivers/net/usb/aqc111.h | 101 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 149 insertions(+) diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c index 7f3e5a615750..22bb259d71fb 100644 --- a/drivers/net/usb/aqc111.c +++ b/drivers/net/usb/aqc111.c @@ -169,12 +169,60 @@ static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf) static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf) { + u8 reg8; + u16 reg16; + + /* Force bz */ + reg16 = SFR_PHYPWR_RSTCTL_BZ; + aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL, + 2, 2, ®16); + reg16 = 0; + aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL, + 2, 2, ®16); +} + +static int aqc111_reset(struct usbnet *dev) +{ + u8 reg8 = 0; + u16 reg16 = 0; + + reg8 = 0xFF; + aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK, 1, 1, ®8); + + reg8 = 0x0; + aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_SWP_CTRL, 1, 1, ®8); + + aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_MONITOR_MODE, 1, 1, ®8); + reg8 &= ~(SFR_MONITOR_MODE_EPHYRW | SFR_MONITOR_MODE_RWLC | + SFR_MONITOR_MODE_RWMP | SFR_MONITOR_MODE_RWWF | + SFR_MONITOR_MODE_RW_FLAG); + aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_MONITOR_MODE, 1, 1, ®8); + + return 0; +} + +static int aqc111_stop(struct usbnet *dev) +{ + u16 reg16 = 0; + + aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, + 2, 2, ®16); + reg16 &= ~SFR_MEDIUM_RECEIVE_EN; + aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE, + 2, 2, ®16); + reg16 = 0; + aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, + 2, 2, ®16); + + return 0; } static const struct driver_info aqc111_info = { .description = "Aquantia AQtion USB to 5GbE Controller", .bind = aqc111_bind, .unbind = aqc111_unbind, + .reset = aqc111_reset, + .stop = aqc111_stop, }; #define AQC111_USB_ETH_DEV(vid, pid, table) \ diff --git a/drivers/net/usb/aqc111.h b/drivers/net/usb/aqc111.h index 1698a6a104fe..6b34202fa22b 100644 --- a/drivers/net/usb/aqc111.h +++ b/drivers/net/usb/aqc111.h @@ -10,10 +10,111 @@ #ifndef __LINUX_USBNET_AQC111_H #define __LINUX_USBNET_AQC111_H +#define AQ_ACCESS_MAC 0x01 #define AQ_PHY_POWER 0x31 #define AQ_USB_PHY_SET_TIMEOUT 10000 #define AQ_USB_SET_TIMEOUT 4000 +/* SFR Reg. ********************************************/ + +#define SFR_GENERAL_STATUS 0x03 +#define SFR_CHIP_STATUS 0x05 +#define SFR_RX_CTL 0x0B + #define SFR_RX_CTL_TXPADCRC 0x0400 + #define SFR_RX_CTL_IPE 0x0200 + #define SFR_RX_CTL_DROPCRCERR 0x0100 + #define SFR_RX_CTL_START 0x0080 + #define SFR_RX_CTL_RF_WAK 0x0040 + #define SFR_RX_CTL_AP 0x0020 + #define SFR_RX_CTL_AM 0x0010 + #define SFR_RX_CTL_AB 0x0008 + #define SFR_RX_CTL_AMALL 0x0002 + #define SFR_RX_CTL_PRO 0x0001 + #define SFR_RX_CTL_STOP 0x0000 +#define SFR_INTER_PACKET_GAP_0 0x0D +#define SFR_NODE_ID 0x10 +#define SFR_MULTI_FILTER_ARRY 0x16 +#define SFR_MEDIUM_STATUS_MODE 0x22 + #define SFR_MEDIUM_XGMIIMODE 0x0001 + #define SFR_MEDIUM_FULL_DUPLEX 0x0002 + #define SFR_MEDIUM_RXFLOW_CTRLEN 0x0010 + #define SFR_MEDIUM_TXFLOW_CTRLEN 0x0020 + #define SFR_MEDIUM_JUMBO_EN 0x0040 + #define SFR_MEDIUM_RECEIVE_EN 0x0100 +#define SFR_MONITOR_MODE 0x24 + #define SFR_MONITOR_MODE_EPHYRW 0x01 + #define SFR_MONITOR_MODE_RWLC 0x02 + #define SFR_MONITOR_MODE_RWMP 0x04 + #define SFR_MONITOR_MODE_RWWF 0x08 + #define SFR_MONITOR_MODE_RW_FLAG 0x10 + #define SFR_MONITOR_MODE_PMEPOL 0x20 + #define SFR_MONITOR_MODE_PMETYPE 0x40 +#define SFR_PHYPWR_RSTCTL 0x26 + #define SFR_PHYPWR_RSTCTL_BZ 0x0010 + #define SFR_PHYPWR_RSTCTL_IPRL 0x0020 +#define SFR_VLAN_ID_ADDRESS 0x2A +#define SFR_VLAN_ID_CONTROL 0x2B + #define SFR_VLAN_CONTROL_WE 0x0001 + #define SFR_VLAN_CONTROL_RD 0x0002 + #define SFR_VLAN_CONTROL_VSO 0x0010 + #define SFR_VLAN_CONTROL_VFE 0x0020 +#define SFR_VLAN_ID_DATA0 0x2C +#define SFR_VLAN_ID_DATA1 0x2D +#define SFR_RX_BULKIN_QCTRL 0x2E + #define SFR_RX_BULKIN_QCTRL_TIME 0x01 + #define SFR_RX_BULKIN_QCTRL_IFG 0x02 + #define SFR_RX_BULKIN_QCTRL_SIZE 0x04 +#define SFR_RX_BULKIN_QTIMR_LOW 0x2F +#define SFR_RX_BULKIN_QTIMR_HIGH 0x30 +#define SFR_RX_BULKIN_QSIZE 0x31 +#define SFR_RX_BULKIN_QIFG 0x32 +#define SFR_RXCOE_CTL 0x34 + #define SFR_RXCOE_IP 0x01 + #define SFR_RXCOE_TCP 0x02 + #define SFR_RXCOE_UDP 0x04 + #define SFR_RXCOE_ICMP 0x08 + #define SFR_RXCOE_IGMP 0x10 + #define SFR_RXCOE_TCPV6 0x20 + #define SFR_RXCOE_UDPV6 0x40 + #define SFR_RXCOE_ICMV6 0x80 +#define SFR_TXCOE_CTL 0x35 + #define SFR_TXCOE_IP 0x01 + #define SFR_TXCOE_TCP 0x02 + #define SFR_TXCOE_UDP 0x04 + #define SFR_TXCOE_ICMP 0x08 + #define SFR_TXCOE_IGMP 0x10 + #define SFR_TXCOE_TCPV6 0x20 + #define SFR_TXCOE_UDPV6 0x40 + #define SFR_TXCOE_ICMV6 0x80 +#define SFR_BM_INT_MASK 0x41 +#define SFR_BMRX_DMA_CONTROL 0x43 + #define SFR_BMRX_DMA_EN 0x80 +#define SFR_BMTX_DMA_CONTROL 0x46 +#define SFR_PAUSE_WATERLVL_LOW 0x54 +#define SFR_PAUSE_WATERLVL_HIGH 0x55 +#define SFR_ARC_CTRL 0x9E +#define SFR_SWP_CTRL 0xB1 +#define SFR_TX_PAUSE_RESEND_T 0xB2 +#define SFR_ETH_MAC_PATH 0xB7 + #define SFR_RX_PATH_READY 0x01 +#define SFR_BULK_OUT_CTRL 0xB9 + #define SFR_BULK_OUT_FLUSH_EN 0x01 + #define SFR_BULK_OUT_EFF_EN 0x02 + +static struct { + unsigned char ctrl; + unsigned char timer_l; + unsigned char timer_h; + unsigned char size; + unsigned char ifg; +} AQC111_BULKIN_SIZE[] = { + /* xHCI & EHCI & OHCI */ + {7, 0x00, 0x01, 0x1E, 0xFF},/* 10G, 5G, 2.5G, 1G */ + {7, 0xA0, 0x00, 0x14, 0x00},/* 100M */ + /* Jumbo packet */ + {7, 0x00, 0x01, 0x18, 0xFF}, +}; + #endif /* __LINUX_USBNET_AQC111_H */ -- 2.7.4