Re: [PATCH 3/3] [PATCH v2 3/3] usb: typec: tcpm: charge current handling for sink during hard reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ jackp@xxxxxxxxxxxxxx
On Fri, Sep 28, 2018 at 4:47 PM Badhri Jagan Sridharan
<badhri@xxxxxxxxxx> wrote:
>
> During the initial connect to a non-pd port, sink would hard reset
> twice before deeming that the port partner is non-pd. TCPM sets the
> the charge path to false during the hard reset. This causes unnecessary
> connects/disconnects of charge path and makes port take longer to
> charge from the non-pd ports. Avoid this by not setting the charge path
> to false unless the partner has already identified to be pd capable.
>
> When partner is a pd port, set the charge path to false in
> SNK_HARD_RESET_SINK_OFF. Set the current limits to default value based
> of CC pull up and resume the charge path when port enters
> SNK_HARD_RESET_SINK_ON.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
>
> --------
> Changes in V2:
> Based on feedback of jackp@xxxxxxxxxxxxxx
> - vsafe_5v_hard_reset flag from tcpc_config is removed
> - Patch only differentiates between pd port partner and non-pd port
> partner
>
> V1 version of the patch is here:
> https://lkml.org/lkml/2018/9/14/11
> ---
>  drivers/usb/typec/tcpm.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
> index c3ac0e46106b4..c25a69922ee6a 100644
> --- a/drivers/usb/typec/tcpm.c
> +++ b/drivers/usb/typec/tcpm.c
> @@ -3273,7 +3273,8 @@ static void run_state_machine(struct tcpm_port *port)
>         case SNK_HARD_RESET_SINK_OFF:
>                 memset(&port->pps_data, 0, sizeof(port->pps_data));
>                 tcpm_set_vconn(port, false);
> -               tcpm_set_charge(port, false);
> +               if (port->pd_capable)
> +                       tcpm_set_charge(port, false);
>                 tcpm_set_roles(port, port->self_powered, TYPEC_SINK,
>                                TYPEC_DEVICE);
>                 /*
> @@ -3305,6 +3306,12 @@ static void run_state_machine(struct tcpm_port *port)
>                  * Similar, dual-mode ports in source mode should transition
>                  * to PE_SNK_Transition_to_default.
>                  */
> +               if (port->pd_capable) {
> +                       tcpm_set_current_limit(port,
> +                                              tcpm_get_current_limit(port),
> +                                              5000);
> +                       tcpm_set_charge(port, true);
> +               }
>                 tcpm_set_attached_state(port, true);
>                 tcpm_set_state(port, SNK_STARTUP, 0);
>                 break;
> --
> 2.19.0.605.g01d371f741-goog
>



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux