[BUG] usb: USB Mass Storage - USB cable is bad warning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When I plug my USB reader (11b0:6348) into my computer (MSI X399
Carbon Pro, Threadripper 1900X),
I get warnings about a bad usb cable:
Sep 22 11:11:51 ciri kernel: usb 5-3.3-port4: Cannot enable. Maybe the
USB cable is bad?
Sep 22 11:11:52 ciri kernel: usb 5-3.3.4: new high-speed USB device
number 15 using xhci_hcd
Sep 22 11:11:52 ciri kernel: usb 5-3.3.4: New USB device found,
idVendor=11b0, idProduct=6348, bcdDevice= 1.11
Sep 22 11:11:52 ciri kernel: usb 5-3.3.4: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Sep 22 11:11:52 ciri kernel: usb 5-3.3.4: Product: USB3.0 Media Reader
Sep 22 11:11:52 ciri kernel: usb 5-3.3.4: Manufacturer: Kingston
Sep 22 11:11:52 ciri kernel: usb 5-3.3.4: SerialNumber: 201402131335
Sep 22 11:11:52 ciri kernel: usb-storage 5-3.3.4:1.0: USB Mass Storage
device detected
Sep 22 11:11:52 ciri kernel: scsi host11: usb-storage 5-3.3.4:1.0

This warning shows up on all USB3 ports that I plug it in to (tried 3
of them directly off the MB).
I have also tried it using on the other side of a USB3 hub (2109:8110)
and still receive the
same message.  I have tried 3 different USB cables and all report the
same warning.

If I instead plug into one of the USB2 only ports ("console ports" on
MB) I get no warning:
Sep 22 11:37:15 ciri kernel: usb 1-12: new high-speed USB device
number 8 using xhci_hcd
Sep 22 11:37:15 ciri kernel: usb 1-12: New USB device found,
idVendor=11b0, idProduct=6348, bcdDevice= 1.11
Sep 22 11:37:15 ciri kernel: usb 1-12: New USB device strings: Mfr=1,
Product=2, SerialNumber=3
Sep 22 11:37:15 ciri kernel: usb 1-12: Product: USB3.0 Media Reader
Sep 22 11:37:15 ciri kernel: usb 1-12: Manufacturer: Kingston
Sep 22 11:37:15 ciri kernel: usb 1-12: SerialNumber: 201402131335
Sep 22 11:37:15 ciri kernel: usb-storage 1-12:1.0: USB Mass Storage
device detected
Sep 22 11:37:15 ciri kernel: scsi host11: usb-storage 1-12:1.0

The warning appears to be mostly benign, as functionality appears to
be unaffected.  It did
result in me purchasing a few replacement USB cables in an attempt to
remove the warning.

Anything I can do to "fix" this?  I have verified the USB reader
(FCR-HS3) is running the latest
firmware from Kingston.

I am running Linux v4.19-rc4-89-g6ad49fa1993d.

Thanks,

Barry

(Opened https://bugzilla.kernel.org/show_bug.cgi?id=201209 before
being redirected here).



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux