When we are removing HCD, the xhci_configure_endpoint may be timeout.
To get rid of timeout, we'd better return before issue command.
The related log message when removing HCD like below:
[66.736633] usb 3-1: USB disconnect, device number 2
[66.737003] hub 3-1:1.0: hub_ext_port_status failed (err = -71)
[66.737054] usb 3-1.1: USB disconnect, device number 3
[66.759910] xhci-hcd xhci-hcd.1.auto: remove, state 4
[66.765043] usb usb4: USB disconnect, device number 1
[66.770169] usb 4-1: USB disconnect, device number 2
[74.008294] xhci-hcd xhci-hcd.1.auto: Timeout while waiting for
configure endpoint command
[74.018737] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
[74.024446] xhci-hcd xhci-hcd.1.auto: remove, state 1
[74.029594] usb usb3: USB disconnect, device number 1
[74.062310] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
drivers/usb/host/xhci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0420eefa647a..3113938063fd 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2698,7 +2698,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
spin_lock_irqsave(&xhci->lock, flags);
- if (xhci->xhc_state & XHCI_STATE_DYING) {
+ if (xhci->xhc_state & XHCI_STATE_DYING ||
+ xhci->xhc_state & XHCI_STATE_REMOVING) {
spin_unlock_irqrestore(&xhci->lock, flags);
return -ESHUTDOWN;
}
--
2.14.1
