[PATCH 1/2] USB: remove LPM management from usb_driver_claim_interface()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



usb_driver_claim_interface() disables and re-enables Link Power
Management, but it shouldn't do either one, for the reasons listed
below.  This patch removes the two LPM-related function calls from the
routine.

The reason for disabling LPM in the analogous function
usb_probe_interface() is so that drivers won't have to deal with
unwanted LPM transitions in their probe routine.  But
usb_driver_claim_interface() doesn't call the driver's probe routine
(or any other callbacks), so that reason doesn't apply here.

Furthermore, no driver other than usbfs will ever call
usb_driver_claim_interface() unless it is already bound to another
interface in the same device, which means disabling LPM here would be
redundant.  usbfs doesn't interact with LPM at all.

Lastly, the error return from usb_unlocked_disable_lpm() isn't handled
properly; the code doesn't clean up its earlier actions before
returning.

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Fixes: 8306095fd2c1 ("USB: Disable USB 3.0 LPM in critical sections.")
CC: <stable@xxxxxxxxxxxxxxx>

---


[as1877]


 drivers/usb/core/driver.c |   15 ---------------
 1 file changed, 15 deletions(-)

Index: usb-4.x/drivers/usb/core/driver.c
===================================================================
--- usb-4.x.orig/drivers/usb/core/driver.c
+++ usb-4.x/drivers/usb/core/driver.c
@@ -512,7 +512,6 @@ int usb_driver_claim_interface(struct us
 	struct device *dev;
 	struct usb_device *udev;
 	int retval = 0;
-	int lpm_disable_error = -ENODEV;
 
 	if (!iface)
 		return -ENODEV;
@@ -533,16 +532,6 @@ int usb_driver_claim_interface(struct us
 
 	iface->condition = USB_INTERFACE_BOUND;
 
-	/* See the comment about disabling LPM in usb_probe_interface(). */
-	if (driver->disable_hub_initiated_lpm) {
-		lpm_disable_error = usb_unlocked_disable_lpm(udev);
-		if (lpm_disable_error) {
-			dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n",
-				__func__, driver->name);
-			return -ENOMEM;
-		}
-	}
-
 	/* Claimed interfaces are initially inactive (suspended) and
 	 * runtime-PM-enabled, but only if the driver has autosuspend
 	 * support.  Otherwise they are marked active, to prevent the
@@ -561,10 +550,6 @@ int usb_driver_claim_interface(struct us
 	if (device_is_registered(dev))
 		retval = device_bind_driver(dev);
 
-	/* Attempt to re-enable USB3 LPM, if the disable was successful. */
-	if (!lpm_disable_error)
-		usb_unlocked_enable_lpm(udev);
-
 	return retval;
 }
 EXPORT_SYMBOL_GPL(usb_driver_claim_interface);




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux