On 9/5/2018 6:56 PM, Christian Hewitt wrote: > USB devices work when connected to Amlogic GXBB hardware before power > on, but not when connected after boot (hotplugged). With this patch > hotplugging works again. This change was copied from the Rockchip > patch here: (https://urldefense.proofpoint.com/v2/url?u=https-3A__marc.info_-3Fl-3Dlinux-2Dusb-26m-3D153205711616460-26w-3D2&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=cQBKt4q-qzNVC53rNAwuwplH23V61rHQhhULvdLA0U8&m=m5T_SsLG-_isQDyjrHuiVqJWdEqZ21Lcr70lObiPwrg&s=D26wJzWeREBz6_XcmdTqo8k69mPRqGaIbRWl_77Ns3c&e=) > > Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx> Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx> > --- > drivers/usb/dwc2/params.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c > index bf7052e..93561a2 100644 > --- a/drivers/usb/dwc2/params.c > +++ b/drivers/usb/dwc2/params.c > @@ -110,6 +110,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) > p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; > p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << > GAHBCFG_HBSTLEN_SHIFT; > + p->power_down = false; > } > > static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg) >
