New registers were added to dwc otg core. GREFCLK - This register used to control ref_clk parameters. GINTSTS2 - New WKUP_ALERT interrupt was added. GINTMSK2 - Mask register for GINTSTS2. Signed-off-by: Grigor Tovmasyan <tovmasya@xxxxxxxxxxxx> --- drivers/usb/dwc2/hw.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 524629428439..2b1ea441b7d4 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -405,6 +405,19 @@ #define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) #define ADPCTL_PRB_DSCHRG_SHIFT 0 +#define GREFCLK HSOTG_REG(0x0064) +#define GREFCLK_REFCLKPER_MASK (0x1ffff << 15) +#define GREFCLK_REFCLKPER_SHIFT 15 +#define GREFCLK_REF_CLK_MODE BIT(14) +#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK (0x3ff) +#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT 0 + +#define GINTMSK2 HSOTG_REG(0x0068) +#define GINTMSK2_WKUP_ALERT_INT_MSK BIT(0) + +#define GINTSTS2 HSOTG_REG(0x006c) +#define GINTSTS2_WKUP_ALERT_INT BIT(0) + #define HPTXFSIZ HSOTG_REG(0x100) /* Use FIFOSIZE_* constants to access this register */ -- 2.11.0
