Some hardware implementations require to configure pins differently according to the USB role (host/device), this can be an update of the pins routing or a simple GPIO value change. This patch introduces new optional "host" and "device" pinctrls. If these pinctrls are defined by the device, they are respectively selected on host/device role start. Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx> --- v2: Add new pin modes documentation (host, device) Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 0e03344..ea7033c 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -76,6 +76,8 @@ Optional properties: needs to make sure it does not send more than 90% maximum_periodic_data_per_frame. The use case is multiple transactions, but less frame rate. +- pinctrl-names: Names for optional pin modes in "default", "host", "device" +- pinctrl-n: alternate pin modes i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one -- 2.7.4
