Use a proper PHY driver, instead of hooks to a board support package. Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> --- arch/arm/mach-mmp/devices.c | 11 +------- drivers/usb/gadget/udc/mv_udc.h | 7 ++++- drivers/usb/gadget/udc/mv_udc_core.c | 38 ++++++++-------------------- 3 files changed, 17 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index eb9b3c34e90a..d925be9f14a9 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -263,21 +263,12 @@ struct platform_device pxa168_device_usb_phy = { #if IS_ENABLED(CONFIG_USB_MV_UDC) struct resource pxa168_u2o_resources[] = { - /* regbase */ [0] = { - .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .start = PXA168_U2O_REGBASE, .end = PXA168_U2O_REGBASE + USB_REG_RANGE, .flags = IORESOURCE_MEM, - .name = "capregs", }, - /* phybase */ [1] = { - .start = PXA168_U2O_PHYBASE, - .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, - .flags = IORESOURCE_MEM, - .name = "phyregs", - }, - [2] = { .start = IRQ_PXA168_USB1, .end = IRQ_PXA168_USB1, .flags = IORESOURCE_IRQ, diff --git a/drivers/usb/gadget/udc/mv_udc.h b/drivers/usb/gadget/udc/mv_udc.h index b3f759c0962c..6f04f432964d 100644 --- a/drivers/usb/gadget/udc/mv_udc.h +++ b/drivers/usb/gadget/udc/mv_udc.h @@ -6,6 +6,9 @@ #ifndef __MV_UDC_H #define __MV_UDC_H +/* registers */ +#define U2x_CAPREGS_OFFSET 0x100 + #define VUSBHS_MAX_PORTS 8 #define DQH_ALIGNMENT 2048 @@ -174,9 +177,9 @@ struct mv_udc { struct platform_device *dev; int irq; + void __iomem *base; struct mv_cap_regs __iomem *cap_regs; struct mv_op_regs __iomem *op_regs; - void __iomem *phy_regs; unsigned int max_eps; struct mv_dqh *ep_dqh; size_t ep_dqh_size; @@ -219,6 +222,8 @@ struct mv_udc { /* some SOC has mutiple clock sources for USB*/ struct clk *clk; + + struct phy *phy; }; /* endpoint data structure */ diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c index 95f52232493b..c701c83d3af5 100644 --- a/drivers/usb/gadget/udc/mv_udc_core.c +++ b/drivers/usb/gadget/udc/mv_udc_core.c @@ -1069,14 +1069,11 @@ static int mv_udc_enable_internal(struct mv_udc *udc) if (retval) return retval; - if (udc->pdata->phy_init) { - retval = udc->pdata->phy_init(udc->phy_regs); - if (retval) { - dev_err(&udc->dev->dev, - "init phy error %d\n", retval); - udc_clock_disable(udc); - return retval; - } + retval = phy_init(udc->phy); + if (retval) { + dev_err(&udc->dev->dev, "init phy error %d\n", retval); + udc_clock_disable(udc); + return retval; } udc->active = 1; @@ -1095,8 +1092,7 @@ static void mv_udc_disable_internal(struct mv_udc *udc) { if (udc->active) { dev_dbg(&udc->dev->dev, "disable udc\n"); - if (udc->pdata->phy_deinit) - udc->pdata->phy_deinit(udc->phy_regs); + phy_exit(udc->phy); udc_clock_disable(udc); udc->active = 0; } @@ -2147,30 +2143,16 @@ static int mv_udc_probe(struct platform_device *pdev) if (IS_ERR(udc->clk)) return PTR_ERR(udc->clk); - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); + r = platform_get_resource(udc->dev, IORESOURCE_MEM, 0); if (r == NULL) { dev_err(&pdev->dev, "no I/O memory resource defined\n"); return -ENODEV; } - udc->cap_regs = (struct mv_cap_regs __iomem *) - devm_ioremap(&pdev->dev, r->start, resource_size(r)); - if (udc->cap_regs == NULL) { - dev_err(&pdev->dev, "failed to map I/O memory\n"); - return -EBUSY; - } - - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs"); - if (r == NULL) { - dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); - return -ENODEV; - } + udc->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); - udc->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); - if (udc->phy_regs == NULL) { - dev_err(&pdev->dev, "failed to map phy I/O memory\n"); - return -EBUSY; - } + udc->cap_regs = + (void __iomem *) ((unsigned long)udc->base + U2x_CAPREGS_OFFSET); /* we will acces controller register, so enable the clk */ retval = mv_udc_enable_internal(udc); -- 2.17.1