Hi Sebastian,
On Wednesday, 20 June 2018 16:21:44 EEST Sebastian Andrzej Siewior wrote:
> On 2018-06-20 14:55:23 [+0300], Laurent Pinchart wrote:
> > Hi Sebastian,
>
> Hi Laurent,
>
> > Thank you for the patch.
> >
> > On Wednesday, 20 June 2018 14:01:05 EEST Sebastian Andrzej Siewior wrote:
> > > Using usb_fill_int_urb() helps to find code which initializes an
> > > URB. A grep for members of the struct (like ->complete) reveal lots
> > > of other things, too.
> > > usb_fill_int_urb() also checks bInterval to be in the 1…16 range on
> > > HS/SS.
> > >
> > > Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> > > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> > > ---
> > >
> > > drivers/media/usb/uvc/uvc_video.c | 14 ++++++--------
> > > 1 file changed, 6 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/media/usb/uvc/uvc_video.c
> > > b/drivers/media/usb/uvc/uvc_video.c index a88b2e51a666..79e7a827ed44
> > > 100644
> > > --- a/drivers/media/usb/uvc/uvc_video.c
> > > +++ b/drivers/media/usb/uvc/uvc_video.c
> > > @@ -1619,21 +1619,19 @@ static int uvc_init_video_isoc(struct
> > > uvc_streaming *stream,
> > > return -ENOMEM;
> > > }
> > >
> > > - urb->dev = stream->dev->udev;
> > > - urb->context = stream;
> > > - urb->pipe = usb_rcvisocpipe(stream->dev->udev,
> > > - ep->desc.bEndpointAddress);
> > > + usb_fill_int_urb(urb, stream->dev->udev,
> > > + usb_rcvisocpipe(stream->dev->udev,
> > > + ep->desc.bEndpointAddress),
> > > + stream->urb_buffer[i], size,
> > > + uvc_video_complete, stream,
> > > + ep->desc.bInterval);
> >
> > You're filling an isoc URB with usb_fill_int_urb(), which is explicitly
> > documented as usable to fill an interrupt URB. Shouldn't we create a
> > usb_fill_isoc_urb() function ? It could just be an alias for
> > usb_fill_int_urb() if isoc and interrupt URBs don't need to be treated
> > differently. Alternatively, I'd be fine using usb_fill_int_urb() if the
> > function documentation's was updated to mention isoc URBs as well.
>
> I thought I read it there but I couldn't find it. And then I found it in
>
> Documentation/driver-api/usb/URB.rst:
> | you specify. You can use the :c:func:`usb_fill_int_urb` macro to fill
> | most ISO transfer fields.
>
> So you simply asking that the kerneldoc of usb_fill_int_urb() is
> extended to mention isoc, too?
That would be nice I think.
> > > #ifndef CONFIG_DMA_NONCOHERENT
> > > urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
> > > urb->transfer_dma = stream->urb_dma[i];
> > > #else
> > >
> > > #endif
> > > - urb->interval = ep->desc.bInterval;
> >
> > Unless I'm mistaken this introduces a change in behaviour for HS and SS,
> > and should thus be documented in the commit message.
>
> I did:
> | usb_fill_int_urb() also checks bInterval to be in the 1…16 range on
> | HS/SS.
>
> so this wasn't enough?
This sounds to me like a sanity check, while the patch effectively changes the
code as follows for HS and SS:
- urb->interval = ep->desc.bInterval;
+ urb->interval = 1 << (ep->desc.bInterval - 1);
I believe the change is correct, although it would be nice if you could
double-check, as the documentation of the function states:
* @interval: what to set the urb interval to, encoded like
* the endpoint descriptor's bInterval value.
> > I suspect that this is the real reason for this patch. I'd thus update the
> > subject line to describe this fix, and the body of the message to explain
> > why using usb_fill_int_urb() is the proper fix.
>
> Actually no. I was looking for all the ->complete handlers and most of
> them used usb_fill_… except a few. And while moving to the function I
> was checking if everything stays the same (and mentioned ->interval
> since ->start_frame is documented as a return parameter).
>
> So here you are asking for a description update which explicit says
> bug-fix?
I'd like that, as it seems to be a bugfix, not just a code cleanup without any
behavioural change.
> > > - urb->transfer_buffer = stream->urb_buffer[i];
> > > - urb->complete = uvc_video_complete;
> > >
> > > urb->number_of_packets = npackets;
> > >
> > > - urb->transfer_buffer_length = size;
> >
> > usb_fill_int_urb() sets urb->start_frame to -1. Does that impact us in any
> > way ?
>
> It should not. The documentation says:
> | * @start_frame: Returns the initial frame for isochronous transfers.
Thanks for checking.
> > > for (j = 0; j < npackets; ++j) {
> > >
> > > urb->iso_frame_desc[j].offset = j * psize;
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
