Instead of the tcpm specific mux states, using the generic
USB type-c connector state values, and with DisplayPort
using connector states defined for the DisplayPort Alt Mode.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/usb/typec/mux/pi3usb30532.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c
index b0e88db60ecf..bcea242852f2 100644
--- a/drivers/usb/typec/mux/pi3usb30532.c
+++ b/drivers/usb/typec/mux/pi3usb30532.c
@@ -9,7 +9,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/usb/tcpm.h>
+#include <linux/usb/typec_dp.h>
#include <linux/usb/typec_mux.h>
#define PI3USB30532_CONF 0x00
@@ -83,21 +83,24 @@ static int pi3usb30532_mux_set(struct typec_mux *mux, int state)
new_conf = pi->conf;
switch (state) {
- case TYPEC_MUX_NONE:
+ case TYPEC_STATE_SAFE:
new_conf = PI3USB30532_CONF_OPEN;
break;
- case TYPEC_MUX_USB:
+ case TYPEC_STATE_USB:
new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
- PI3USB30532_CONF_USB3;
+ PI3USB30532_CONF_USB3;
break;
- case TYPEC_MUX_DP:
+ case TYPEC_DP_STATE_C:
+ case TYPEC_DP_STATE_E:
new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
PI3USB30532_CONF_4LANE_DP;
break;
- case TYPEC_MUX_DOCK:
+ case TYPEC_DP_STATE_D:
new_conf = (new_conf & PI3USB30532_CONF_SWAP) |
PI3USB30532_CONF_USB3_AND_2LANE_DP;
break;
+ default:
+ break;
}
ret = pi3usb30532_set_conf(pi, new_conf);
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
