Even though we only use them once, it is better to not put/release
the GPIOs immediately after use, so that others cannot claim them.
Use devm functions to get the phy GPIOs, so that they will be
automatically released when were unbound from the device and
remove the gpio_put calls.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-pci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 3f64cf7bf6c7..34bc43e1b5f8 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -186,20 +186,20 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
* put the gpio descriptors again here because the phy driver
* might want to grab them, too.
*/
- gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
+ gpio = devm_gpiod_get_optional(&pdev->dev, "cs",
+ GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
gpiod_set_value_cansleep(gpio, 1);
- gpiod_put(gpio);
- gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+ gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
+ GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
gpiod_set_value_cansleep(gpio, 1);
- gpiod_put(gpio);
usleep_range(10000, 11000);
}
}
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
