On 2018-06-06 04:04, Peter Chen wrote:
The commit 4e88d4c08301 ("usb: add a flag to skip PHY
initialization to struct usb_hcd") delete the assignment
for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect)
are not called, the USB PHY driver is not notified of hot plug
event, then the disconnection will not be detected by hardware.
Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization
to struct usb_hcd")
Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Reported-by: Mats Karrman <mats.dev.list@xxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
Works for me!
Tested on SolidRun Hummingboard fsl,imx6dl
Tested-by: Mats Karrman <mats.dev.list@xxxxxxxxx>
Thanks,
Mats
---
drivers/usb/chipidea/host.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index af45aa3222b5..4638d9b066be 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -124,8 +124,11 @@ static int host_start(struct ci_hdrc *ci)
hcd->power_budget = ci->platdata->power_budget;
hcd->tpl_support = ci->platdata->tpl_support;
- if (ci->phy || ci->usb_phy)
+ if (ci->phy || ci->usb_phy) {
hcd->skip_phy_initialization = 1;
+ if (ci->usb_phy)
+ hcd->usb_phy = ci->usb_phy;
+ }
ehci = hcd_to_ehci(hcd);
ehci->caps = ci->hw_bank.cap;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html