Add a hub device and two USB devices, of which one has a combined node.
Note that we need to represent the serial ports as well -- consider
devices with multiple ports per interface; which one should serdev
use? Sibling devices can also be described this way (e.g. gpio@0), and
would need to use the same address size.
Also note that serial ports have a standardised node name in ePAPR.
Not-signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
arch/arm/boot/dts/am335x-boneblack.dts | 57 ++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index d154d3133c16..d5f4c78efa53 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -26,3 +26,60 @@
opp-supported-hw = <0x06 0x0100>;
};
};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dlink_hub: hub@1 {
+ compatible = "usb2101,8501";
+ reg = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ft232r: device@3 {
+ compatible = "usb403,6001";
+ reg = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ serial@0 {
+ reg = <0>;
+
+ serdev {
+ compatible = "none,serdev-mockup";
+ };
+ };
+ };
+
+ mos7820: device@5 {
+ compatible = "usb9710,7840";
+ reg = <5>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interface@0 {
+ compatible = "usbif9710,7840.config1.0";
+ reg = <0 1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ serial@0 {
+ reg = <0>;
+
+ gnss {
+ compatible = "u-blox,neo-8";
+ };
+ };
+
+ serial@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+};
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
