Hi Rob,
On Wed, May 23, 2018 at 5:00 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Wed, May 23, 2018 at 1:52 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda.uh@xxxxxxxxxxx> wrote:
>>> From: Rob Herring, Sent: Wednesday, May 23, 2018 2:13 AM
>>> On Tue, May 22, 2018 at 09:01:07PM +0900, Yoshihiro Shimoda wrote:
>>> > --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
>>> > +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
>>> > @@ -19,6 +19,9 @@ Required properties:
>>> > Optional properties:
>>> > - phys: phandle + phy specifier pair
>>> > - phy-names: must be "usb"
>>> > + - The connection to a usb3.0 host node needs by using OF graph bindings for
>>> > + usb role switch.
>>> > + - port@0 = USB3.0 host port.
>>>
>>> On the host side, this might conflict with the USB connector binding.
>>>
>>> I would either make sure this can work with the connector binding by
>>> having 2 endpoints on the HS or SS port or just use the 'companion'
>>> property defined in usb-generic.txt.
>>
>> I don't understand the first one now... This means the renesas_usb3 should follow
>> USB connector binding and have 2 endpoints for the usb role switch to avoid
>> the conflict like below?
>> - port1@0: Super Speed (SS), present in SS capable connectors (from usb-connector.txt).
>> - port1@1: USB3.0 host port.
>
> I'm confused, SS and USB3.0 are the same essentially. It would be:
>
> port@1/endpoint@0: SS host port
> port@1/endpoint@1: SS device port
>
>> About the 'companion' in usb-generic.txt, the property intends to be used for EHCI or host side
>> like the commit log [1]. If there is accept to use 'companion' for this patch, I think it will
>> be simple to achieve this role switch feature. However, in last month, I submitted a similar patch [2]
>> that has "renesas,host" property, but I got reply from Andy [3] and Heikki [4]. So, I'm
>> trying to improve the device connection framework [5] now.
>
> I think this case is rare enough that we don't need a general solution
> using OF graph, so I'm fine with a simple, single property to link the
> 2 nodes. Either reusing "companion" or "renesas,host" is fine by me.
I'd go for the standard "companion" over "renesas,host"[*].
[*] Doh, we have another one ("renesas,bonding"), invented when I wasn't
aware of the existence of "companion" yet...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
