Use port structures instead of mmio port arrays for
xhci_port_missing_cas_quirk() and xhci_set_remote_wake_mask() in
xhci-hub.c
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-hub.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0796f08..372b448 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -691,11 +691,11 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
}
static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
- __le32 __iomem **port_array, int port_id, u16 wake_mask)
+ struct xhci_port *port, u16 wake_mask)
{
u32 temp;
- temp = readl(port_array[port_id]);
+ temp = readl(port->addr);
temp = xhci_port_state_to_neutral(temp);
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
@@ -713,7 +713,7 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
else
temp &= ~PORT_WKOC_E;
- writel(temp, port_array[port_id]);
+ writel(temp, port->addr);
}
/* Test and clear port RWC bit */
@@ -1290,8 +1290,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
- xhci_set_remote_wake_mask(xhci, port_array,
- wIndex, wake_mask);
+ xhci_set_remote_wake_mask(xhci, ports[wIndex],
+ wake_mask);
temp = readl(ports[wIndex]->addr);
xhci_dbg(xhci, "set port remote wake mask, "
"actual port %d status = 0x%x\n",
@@ -1568,12 +1568,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
* warm reset a USB3 device stuck in polling or compliance mode after resume.
* See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
*/
-static bool xhci_port_missing_cas_quirk(int port_index,
- __le32 __iomem **port_array)
+static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
{
u32 portsc;
- portsc = readl(port_array[port_index]);
+ portsc = readl(port->addr);
/* if any of these are set we are not stuck */
if (portsc & (PORT_CONNECT | PORT_CAS))
@@ -1586,9 +1585,9 @@ static bool xhci_port_missing_cas_quirk(int port_index,
/* clear wakeup/change bits, and do a warm port reset */
portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
portsc |= PORT_WR;
- writel(portsc, port_array[port_index]);
+ writel(portsc, port->addr);
/* flush write */
- readl(port_array[port_index]);
+ readl(port->addr);
return true;
}
@@ -1638,7 +1637,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
/* warm reset CAS limited ports stuck in polling/compliance */
if ((xhci->quirks & XHCI_MISSING_CAS) &&
(hcd->speed >= HCD_USB3) &&
- xhci_port_missing_cas_quirk(port_index, port_array)) {
+ xhci_port_missing_cas_quirk(ports[port_index])) {
xhci_dbg(xhci, "reset stuck port %d\n", port_index);
clear_bit(port_index, &bus_state->bus_suspended);
continue;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
