Replace all __u types with their u counterparts throughout the driver
(whose structures are not exported to user space).
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/ftdi_sio.c | 50 +++++++++++++++++------------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 62c99871863c..0d24da03a4a3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -54,7 +54,7 @@ struct ftdi_private {
int custom_divisor; /* custom_divisor kludge, this is for
baud_base (different from what goes to the
chip!) */
- __u16 last_set_data_urb_value ;
+ u16 last_set_data_urb_value;
/* the last data state set - needed for doing
* a break
*/
@@ -62,7 +62,7 @@ struct ftdi_private {
unsigned long last_dtr_rts; /* saved modem control outputs */
char prev_status; /* Used for TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
- __u16 interface; /* FT2232C, FT2232H or FT4232H port interface
+ u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
speed_t force_baud; /* if non-zero, force the baud rate to
@@ -1063,10 +1063,10 @@ static int ftdi_get_modem_status(struct usb_serial_port *port,
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
-static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
-static __u32 ftdi_232bm_baud_to_divisor(int baud);
-static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
-static __u32 ftdi_2232h_baud_to_divisor(int baud);
+static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
+static u32 ftdi_232bm_baud_to_divisor(int baud);
+static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
+static u32 ftdi_2232h_baud_to_divisor(int baud);
static struct usb_serial_driver ftdi_sio_device = {
.driver = {
@@ -1136,14 +1136,14 @@ static unsigned short int ftdi_232am_baud_to_divisor(int baud)
return ftdi_232am_baud_base_to_divisor(baud, 48000000);
}
-static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
+static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
- __u32 divisor;
+ u32 divisor;
/* divisor shifted 3 bits to the left */
int divisor3 = base / 2 / baud;
divisor = divisor3 >> 3;
- divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+ divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1)
divisor = 0;
@@ -1152,22 +1152,22 @@ static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
return divisor;
}
-static __u32 ftdi_232bm_baud_to_divisor(int baud)
+static u32 ftdi_232bm_baud_to_divisor(int baud)
{
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
}
-static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
+static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
- __u32 divisor;
+ u32 divisor;
int divisor3;
/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
divisor3 = base * 8 / (baud * 10);
divisor = divisor3 >> 3;
- divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
+ divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1)
divisor = 0;
@@ -1182,7 +1182,7 @@ static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
return divisor;
}
-static __u32 ftdi_2232h_baud_to_divisor(int baud)
+static u32 ftdi_2232h_baud_to_divisor(int baud)
{
return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
}
@@ -1236,12 +1236,12 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
}
-static __u32 get_ftdi_divisor(struct tty_struct *tty,
+static u32 get_ftdi_divisor(struct tty_struct *tty,
struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct device *dev = &port->dev;
- __u32 div_value = 0;
+ u32 div_value = 0;
int div_okay = 1;
int baud;
@@ -1299,7 +1299,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
case FT232RL: /* FT232RL chip */
case FTX: /* FT-X series */
if (baud <= 3000000) {
- __u16 product_id = le16_to_cpu(
+ u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
if (((product_id == FTDI_NDI_HUC_PID) ||
(product_id == FTDI_NDI_SPECTRA_SCU_PID) ||
@@ -1346,19 +1346,19 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- __u16 urb_value;
- __u16 urb_index;
- __u32 urb_index_value;
+ u16 urb_value;
+ u16 urb_index;
+ u32 urb_index_value;
int rv;
urb_index_value = get_ftdi_divisor(tty, port);
- urb_value = (__u16)urb_index_value;
- urb_index = (__u16)(urb_index_value >> 16);
+ urb_value = (u16)urb_index_value;
+ urb_index = (u16)(urb_index_value >> 16);
if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) ||
(priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) {
/* Probably the BM type needs the MSB of the encoded fractional
* divider also moved like for the chips above. Any infos? */
- urb_index = (__u16)((urb_index << 8) | priv->interface);
+ urb_index = (u16)((urb_index << 8) | priv->interface);
}
rv = usb_control_msg(port->serial->dev,
@@ -2140,7 +2140,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- __u16 urb_value;
+ u16 urb_value;
/* break_state = -1 to turn on break, and 0 to turn off break */
/* see drivers/char/tty_io.c to see it used */
@@ -2192,7 +2192,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
- __u16 urb_value; /* will hold the new flags */
+ u16 urb_value; /* will hold the new flags */
/* Added for xon/xoff support */
unsigned int iflag = termios->c_iflag;
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
