Add separate dwc3-qcom glue driver for Qualcomm SOCs having dwc3 core. It is needed to support peripheral mode. Patches also add support to invoke PHY runtime PM functions on host mode bus-suspend. Changes since v2: - Addressed Rob's comments for DT binding documentation. Changes since v1: - Move dwc3 core register accesses from glue driver to dwc3 core as per review comment from Felipe. - Addressed other review comments from Felipe and Rob. - Some other minor code changes related to redability. - Add reset_control assert in driver probe to ensure core registers are reset to POR value in case of any initalization by boot code. Manu Gautam (3): dt-bindings: usb: Update documentation for Qualcomm DWC3 driver usb: dwc3: Add Qualcomm DWC3 glue driver usb: dwc3: core: Suspend PHYs on runtime suspend in host mode .../devicetree/bindings/usb/qcom,dwc3.txt | 85 ++- drivers/usb/dwc3/Kconfig | 12 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/core.c | 36 +- drivers/usb/dwc3/dwc3-of-simple.c | 1 - drivers/usb/dwc3/dwc3-qcom.c | 618 +++++++++++++++++++++ 6 files changed, 727 insertions(+), 26 deletions(-) create mode 100644 drivers/usb/dwc3/dwc3-qcom.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
