Re: [PATCH v2 1/2] usb: dwc2: alloc dma aligned buffer for isoc split in

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, May 1, 2018 at 8:04 PM, William Wu <william.wu@xxxxxxxxxxxxxx> wrote:
> The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in
> a more supported way") rips out a lot of code to simply the
> allocation of aligned DMA. However, it also introduces a new
> issue when use isoc split in transfer.
>
> In my test case, I connect the dwc2 controller with an usb hs
> Hub (GL852G-12), and plug an usb fs audio device (Plantronics
> headset) into the downstream port of Hub. Then use the usb mic
> to record, we can find noise when playback.
>
> It's because that the usb Hub uses an MDATA for the first
> transaction and a DATA0 for the second transaction for the isoc
> split in transaction. An typical isoc split in transaction sequence
> like this:
>
> - SSPLIT IN transaction
> - CSPLIT IN transaction
>   - MDATA packet
> - CSPLIT IN transaction
>   - DATA0 packet
>
> The DMA address of MDATA (urb->dma) is always DWORD-aligned, but
> the DMA address of DATA0 (urb->dma + qtd->isoc_split_offset) may
> not be DWORD-aligned, it depends on the qtd->isoc_split_offset (the
> length of MDATA). In my test case, the length of MDATA is usually
> unaligned, this casue DATA0 packet transmission error.
>
> This patch base on the old way of aligned DMA allocation in the
> dwc2 driver to get aligned DMA for isoc split in.
>
> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - None
>
>  drivers/usb/dwc2/hcd.c       | 63 +++++++++++++++++++++++++++++++++++++++++---
>  drivers/usb/dwc2/hcd.h       | 10 +++++++
>  drivers/usb/dwc2/hcd_intr.c  |  8 ++++++
>  drivers/usb/dwc2/hcd_queue.c |  8 +++++-
>  4 files changed, 85 insertions(+), 4 deletions(-)

A word of warning that I'm pretty rusty on dwc2 and even when I was
making lots of patches I still considered myself a bit clueless.
...so if something seems wrong, please call me on it...


> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index 190f959..8c2b35f 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -1562,11 +1562,20 @@ static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
>         }
>
>         if (hsotg->params.host_dma) {
> -               dwc2_writel((u32)chan->xfer_dma,
> -                           hsotg->regs + HCDMA(chan->hc_num));
> +               dma_addr_t dma_addr;
> +
> +               if (chan->align_buf) {
> +                       if (dbg_hc(chan))
> +                               dev_vdbg(hsotg->dev, "align_buf\n");
> +                       dma_addr = chan->align_buf;
> +               } else {
> +                       dma_addr = chan->xfer_dma;
> +               }
> +               dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num));
> +
>                 if (dbg_hc(chan))
>                         dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
> -                                (unsigned long)chan->xfer_dma, chan->hc_num);
> +                                (unsigned long)dma_addr, chan->hc_num);
>         }
>
>         /* Start the split */
> @@ -2620,6 +2629,33 @@ static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg,
>         }
>  }
>
> +static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg,
> +                                           struct dwc2_qh *qh,
> +                                           struct dwc2_host_chan *chan)
> +{
> +       if (!qh->dw_align_buf) {
> +               qh->dw_align_buf = kmalloc(chan->max_packet,

So you're potentially doing a bounce buffer atop a bounce buffer now,
right?  That seems pretty non-optimal.  You're also back to doing a
kmalloc at interrupt time which I found was pretty bad for
performance.

Is there really no way you can do your memory allocation in
dwc2_alloc_dma_aligned_buffer() instead of here?  For input packets,
if you could just allocate an extra 3 bytes in the original bounce
buffer you could just re-use the original bounce buffer together with
a memmove?  AKA:

transfersize = 13 + 64;
buf = alloc(16 + 64);

// Do the first transfer, no problems.
dma_into(buf, 13);

// 2nd transfer isn't aligned, so align.
// we allocated a little extra to account for this
dma_into(buf + 16, 64);

// move back where it belongs.
memmove(buf + 13, buf + 16, 64);


To make the above work you'd need to still allocate a bounce buffer
even if the original "urb->transfer_buffer" was already aligned.
Ideally you'd be able to know when dwc2_alloc_dma_aligned_buffer()
that this is one of the special cases where you need a slightly
oversized bounce buffer.

---

If you somehow need to do something for output, you'd do the opposite.
You'd copy backwards top already transferred data to align.


> +                                          GFP_ATOMIC | GFP_DMA);
> +               if (!qh->dw_align_buf)
> +                       return -ENOMEM;
> +
> +               qh->dw_align_buf_size = chan->max_packet;
> +       }
> +
> +       qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf,
> +                                             qh->dw_align_buf_size,
> +                                             DMA_FROM_DEVICE);
> +
> +       if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) {
> +               dev_err(hsotg->dev, "can't map align_buf\n");
> +               chan->align_buf = 0;
> +               return -EINVAL;
> +       }
> +
> +       chan->align_buf = qh->dw_align_buf_dma;
> +       return 0;
> +}
> +
>  #define DWC2_USB_DMA_ALIGN 4
>
>  struct dma_aligned_buffer {
> @@ -2797,6 +2833,27 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
>         /* Set the transfer attributes */
>         dwc2_hc_init_xfer(hsotg, chan, qtd);
>
> +       /* For non-dword aligned buffers */
> +       if (hsotg->params.host_dma > 0 && qh->do_split &&
> +           chan->ep_is_in && (chan->xfer_dma & 0x3)) {

So what happens if were unaligned (AKA (chan->xfer_dma & 0x3)) but
we're not doing split or it's not an IN EP?  Do we just fail then?

I guess the rest of this patch only handles the "in" case and maybe
you expect that the problems will only come about for do_split, but it
still might be wise to at least print a warning in the other cases?
>From reading dwc2_hc_init_xfer() it seems like you could run into this
same problem in the "out" case?


> +               dev_vdbg(hsotg->dev, "Non-aligned buffer\n");
> +               if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) {
> +                       dev_err(hsotg->dev,
> +                               "%s: Failed to allocate memory to handle non-dword aligned buffer\n",
> +                               __func__);

Here and elsewhere in this patch: In general I think policy is that
you shouldn't include __func__ for dev_err().  The string together
with the name of the device is supposed to uniquely determine where
you are.


> +                       /* Add channel back to free list */
> +                       chan->align_buf = 0;
> +                       chan->multi_count = 0;
> +                       list_add_tail(&chan->hc_list_entry,
> +                                     &hsotg->free_hc_list);
> +                       qtd->in_process = 0;
> +                       qh->channel = NULL;
> +                       return -ENOMEM;
> +               }
> +       } else {
> +               chan->align_buf = 0;
> +       }
> +
>         if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
>             chan->ep_type == USB_ENDPOINT_XFER_ISOC)
>                 /*
> diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
> index 96a9da5..adf1fd0 100644
> --- a/drivers/usb/dwc2/hcd.h
> +++ b/drivers/usb/dwc2/hcd.h
> @@ -76,6 +76,8 @@ struct dwc2_qh;
>   *                      (micro)frame
>   * @xfer_buf:           Pointer to current transfer buffer position
>   * @xfer_dma:           DMA address of xfer_buf
> + * @align_buf:         In Buffer DMA mode this will be used if xfer_buf is not
> + *                     DWORD aligned

Your patch uses tabs but everything else in this comment uses spaces.
Please be consistent with surrounding code.  It looks like I may have
screwed this up in the past on the comment of "struct dwc2_qh", but
that's no reason to mess it up again...


>   * @xfer_len:           Total number of bytes to transfer
>   * @xfer_count:         Number of bytes transferred so far
>   * @start_pkt_count:    Packet count at start of transfer
> @@ -133,6 +135,7 @@ struct dwc2_host_chan {
>
>         u8 *xfer_buf;
>         dma_addr_t xfer_dma;
> +       dma_addr_t align_buf;
>         u32 xfer_len;
>         u32 xfer_count;
>         u16 start_pkt_count;
> @@ -303,6 +306,10 @@ struct dwc2_hs_transfer_time {
>   *                           is tightly packed.
>   * @ls_duration_us:     Duration on the low speed bus schedule.
>   * @ntd:                Actual number of transfer descriptors in a list
> + * @dw_align_buf:      Used instead of original buffer if its physical address
> + *                     is not dword-aligned
> + * @dw_align_buf_size: Size of dw_align_buf
> + * @dw_align_buf_dma:  DMA address for dw_align_buf
>   * @qtd_list:           List of QTDs for this QH
>   * @channel:            Host channel currently processing transfers for this QH
>   * @qh_list_entry:      Entry for QH in either the periodic or non-periodic
> @@ -350,6 +357,9 @@ struct dwc2_qh {
>         struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES];
>         u32 ls_start_schedule_slice;
>         u16 ntd;
> +       u8 *dw_align_buf;
> +       int dw_align_buf_size;
> +       dma_addr_t dw_align_buf_dma;
>         struct list_head qtd_list;
>         struct dwc2_host_chan *channel;
>         struct list_head qh_list_entry;
> diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
> index a5dfd9d..5e2378f 100644
> --- a/drivers/usb/dwc2/hcd_intr.c
> +++ b/drivers/usb/dwc2/hcd_intr.c
> @@ -938,6 +938,14 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
>
>         frame_desc->actual_length += len;
>
> +       if (chan->align_buf) {
> +               dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
> +               dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma,
> +                                chan->qh->dw_align_buf_size, DMA_FROM_DEVICE);
> +               memcpy(qtd->urb->buf + frame_desc->offset +
> +                      qtd->isoc_split_offset, chan->qh->dw_align_buf, len);

Assuming I'm understanding this patch correctly, I think it would be
better to write:

  memcpy(qtd->xfer_dma, chan->qh->dw_align_buf, len);

Then if you ever end up having to align a transfer other than a split
you won't be doing the wrong math.  As it is it's very non-obvious
that you're hardcoding the same formula that's in dwc2_hc_init_xfer()



> +       }
> +
>         qtd->isoc_split_offset += len;
>
>         hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum));
> diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
> index e34ad5e..a120bb0 100644
> --- a/drivers/usb/dwc2/hcd_queue.c
> +++ b/drivers/usb/dwc2/hcd_queue.c
> @@ -1693,8 +1693,14 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
>
>         dwc2_host_put_tt_info(hsotg, qh->dwc_tt);
>
> -       if (qh->desc_list)
> +       if (qh->desc_list) {
>                 dwc2_hcd_qh_free_ddma(hsotg, qh);
> +       } else {
> +               /* kfree(NULL) is safe */
> +               kfree(qh->dw_align_buf);
> +               qh->dw_align_buf_dma = (dma_addr_t)0;

Why assign qh->dw_align_buf_dma to 0?  The next thing you're doing is
kfree(qh).  If you want extra debugging, turn on slub_debug.


> +       }
> +
>         kfree(qh);
>  }
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux