In fact the driver depends on EXTCON only when it's configed as USB_MTU3_DUAL_ROLE, so make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3. Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- drivers/usb/mtu3/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig index 25cd619..8daf277 100644 --- a/drivers/usb/mtu3/Kconfig +++ b/drivers/usb/mtu3/Kconfig @@ -2,7 +2,7 @@ config USB_MTU3 tristate "MediaTek USB3 Dual Role controller" - depends on EXTCON && (USB || USB_GADGET) && HAS_DMA + depends on (USB || USB_GADGET) && HAS_DMA depends on ARCH_MEDIATEK || COMPILE_TEST select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD help @@ -40,6 +40,7 @@ config USB_MTU3_GADGET config USB_MTU3_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3)) + depends on (EXTCON=y || EXTCON=USB_MTU3) help This is the default mode of working of MTU3 controller where both host and gadget features are enabled. -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
