Add support for DT property "microchip,led-modes", a vector of zero to four cells (u32s) in the range 0-15, each of which sets the mode for one of the LEDs. Some possible values are: 0=link/activity 1=link1000/activity 2=link100/activity 3=link10/activity 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on These values are given symbolic constants in a dt-bindings header. Also use the presence of the DT property to indicate that the LEDs should be enabled - necessary in the event that no valid OTP or EEPROM is available. Signed-off-by: Phil Elwell <phil@xxxxxxxxxxxxxxx> Reviewed-by: Andrew Lunn <andrew@xxxxxxx> --- MAINTAINERS | 1 + drivers/net/phy/microchip.c | 25 ++++++++++++++++++++++ drivers/net/usb/lan78xx.c | 32 ++++++++++++++++++++++++++++- include/dt-bindings/net/microchip-lan78xx.h | 21 +++++++++++++++++++ include/linux/microchipphy.h | 3 +++ 5 files changed, 81 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/net/microchip-lan78xx.h diff --git a/MAINTAINERS b/MAINTAINERS index b60179d..23735d9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14573,6 +14573,7 @@ M: Microchip Linux Driver Support <UNGLinuxDriver@xxxxxxxxxxxxx> L: netdev@xxxxxxxxxxxxxxx S: Maintained F: drivers/net/usb/lan78xx.* +F: include/dt-bindings/net/microchip-lan78xx.h USB MASS STORAGE DRIVER M: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c index 0f293ef..ef5e160 100644 --- a/drivers/net/phy/microchip.c +++ b/drivers/net/phy/microchip.c @@ -20,6 +20,8 @@ #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/microchipphy.h> +#include <linux/of.h> +#include <dt-bindings/net/microchip-lan78xx.h> #define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@xxxxxxxxxxxxx>" #define DRIVER_DESC "Microchip LAN88XX PHY driver" @@ -70,6 +72,8 @@ static int lan88xx_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; struct lan88xx_priv *priv; + u32 led_modes[4]; + int len; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -77,6 +81,27 @@ static int lan88xx_probe(struct phy_device *phydev) priv->wolopts = 0; + len = of_property_read_variable_u32_array(dev->of_node, + "microchip,led-modes", + led_modes, + 0, + ARRAY_SIZE(led_modes)); + if (len >= 0) { + u32 reg = 0; + int i; + + for (i = 0; i < len; i++) { + if (led_modes[i] > 15) + return -EINVAL; + reg |= led_modes[i] << (i * 4); + } + for (; i < ARRAY_SIZE(led_modes); i++) + reg |= LAN78XX_FORCE_LED_OFF << (i * 4); + (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg); + } else if (len == -EOVERFLOW) { + return -EINVAL; + } + /* these values can be used to identify internal PHY */ priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID); priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV); diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index a823f01..6b03b97 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -37,6 +37,7 @@ #include <linux/irqchip/chained_irq.h> #include <linux/microchipphy.h> #include <linux/phy.h> +#include <linux/of_mdio.h> #include <linux/of_net.h> #include "lan78xx.h" @@ -1760,6 +1761,7 @@ static int lan78xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx, static int lan78xx_mdio_init(struct lan78xx_net *dev) { + struct device_node *node; int ret; dev->mdiobus = mdiobus_alloc(); @@ -1788,7 +1790,13 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev) break; } - ret = mdiobus_register(dev->mdiobus); + node = of_get_child_by_name(dev->udev->dev.of_node, "mdio"); + if (node) { + ret = of_mdiobus_register(dev->mdiobus, node); + of_node_put(node); + } else { + ret = mdiobus_register(dev->mdiobus); + } if (ret) { netdev_err(dev->net, "can't register MDIO bus\n"); goto exit1; @@ -2077,6 +2085,28 @@ static int lan78xx_phy_init(struct lan78xx_net *dev) mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control); phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv); + if (phydev->mdio.dev.of_node) { + u32 reg; + int len; + + len = of_property_count_elems_of_size(phydev->mdio.dev.of_node, + "microchip,led-modes", + sizeof(u32)); + if (len >= 0) { + /* Ensure the appropriate LEDs are enabled */ + lan78xx_read_reg(dev, HW_CFG, ®); + reg &= ~(HW_CFG_LED0_EN_ | + HW_CFG_LED1_EN_ | + HW_CFG_LED2_EN_ | + HW_CFG_LED3_EN_); + reg |= (len > 0) * HW_CFG_LED0_EN_ | + (len > 1) * HW_CFG_LED1_EN_ | + (len > 2) * HW_CFG_LED2_EN_ | + (len > 3) * HW_CFG_LED3_EN_; + lan78xx_write_reg(dev, HW_CFG, reg); + } + } + genphy_config_aneg(phydev); dev->fc_autoneg = phydev->autoneg; diff --git a/include/dt-bindings/net/microchip-lan78xx.h b/include/dt-bindings/net/microchip-lan78xx.h new file mode 100644 index 0000000..0742ff0 --- /dev/null +++ b/include/dt-bindings/net/microchip-lan78xx.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _DT_BINDINGS_MICROCHIP_LAN78XX_H +#define _DT_BINDINGS_MICROCHIP_LAN78XX_H + +/* LED modes for LAN7800/LAN7850 embedded PHY */ + +#define LAN78XX_LINK_ACTIVITY 0 +#define LAN78XX_LINK_1000_ACTIVITY 1 +#define LAN78XX_LINK_100_ACTIVITY 2 +#define LAN78XX_LINK_10_ACTIVITY 3 +#define LAN78XX_LINK_100_1000_ACTIVITY 4 +#define LAN78XX_LINK_10_1000_ACTIVITY 5 +#define LAN78XX_LINK_10_100_ACTIVITY 6 +#define LAN78XX_DUPLEX_COLLISION 8 +#define LAN78XX_COLLISION 9 +#define LAN78XX_ACTIVITY 10 +#define LAN78XX_AUTONEG_FAULT 12 +#define LAN78XX_FORCE_LED_OFF 14 +#define LAN78XX_FORCE_LED_ON 15 + +#endif diff --git a/include/linux/microchipphy.h b/include/linux/microchipphy.h index eb492d4..8e4015e 100644 --- a/include/linux/microchipphy.h +++ b/include/linux/microchipphy.h @@ -70,4 +70,7 @@ #define LAN88XX_MMD3_CHIP_ID (32877) #define LAN88XX_MMD3_CHIP_REV (32878) +/* Registers specific to the LAN7800/LAN7850 embedded phy */ +#define LAN78XX_PHY_LED_MODE_SELECT (0x1D) + #endif /* _MICROCHIPPHY_H */ -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html