Re: [PATCH v2 2/3] lan78xx: Read LED states from Device Tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 18, 2018 at 04:45:22PM +0100, Phil Elwell wrote:
> Add support for DT property "microchip,led-modes", a vector of zero
> to four cells (u32s) in the range 0-15, each of which sets the mode
> for one of the LEDs. Some possible values are:
> 
>     0=link/activity          1=link1000/activity
>     2=link100/activity       3=link10/activity
>     4=link100/1000/activity  5=link10/1000/activity
>     6=link10/100/activity    14=off    15=on
> 
> These values are given symbolic constants in a dt-bindings header.
> 
> Also use the presence of the DT property to indicate that the
> LEDs should be enabled - necessary in the event that no valid OTP
> or EEPROM is available.

Hi Phil

As i said last week, these are PHY properties, so should be in the PHY
node in device tree. It should be the PHY driver which parses these
properties and configures the LEDs, not the MAC.

	   Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux