On Wed, Apr 18, 2018 at 08:20:28AM +0300, Felipe Balbi wrote: > > Hi Bin, > > Bin Liu <b-liu@xxxxxx> writes: > > On Mon, Apr 09, 2018 at 02:26:14PM +0300, Felipe Balbi wrote: > >> Hi guys, > >> > >> I've been working on this series for a while now. I feels like after > >> this series the transfer management code is far easier to read and > >> understand. > >> > >> Based on my tests, I have no regressions. Tested g_mass_storage and all > >> of testusb's tests (including ISOC). > >> > >> Patches are also available on dwc3-improve-isoc-endpoints in my k.org > >> tree. Test reports would be VERY, VERY, VERY welcome. Please give this a > >> go so we avoid regressions on v4.18. > > > > Have you tested g_webcam? I just tested your dwc3-improve-isoc-endpoints > > for isoc I only tested g_zero. Then writting down details on what I observed probably won't help you :( > > branch on TI VAYU evm, it has issues in both high-speed and super-speed > > connections. It works fine with v4.17-rc1. > > > > If it suppose to work with g-webcam, please let me know if you want > > the details of the problems I see - the log is very long in super-speed > > failure. > > Sure, give me some details of what's going on. Some bisection would be > great too, then I'll know which patch to blame and where to focus fixes. Roger has a copy of your previous work here: git@xxxxxxxxxx:rogerq/linux.git, branch balbi-dwc3-improve-isoc-endpoints I just tested it and it works fine with g_webcam. Do you think this information will help you? If so it saves me time on bisect ;) Regards, -Bin. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
