On the db410c 96boards platform we have a TC7USB40MU on the board to mux the D+/D- lines coming from the controller between a micro usb "device" port and a USB hub for "host" roles[1]. During a role switch, we need to toggle this mux to forward the D+/D- lines to either the port or the hub. Add the necessary code to do the role switch in chipidea core via the generic mux framework. Board configurations like on db410c are expected to change roles via the sysfs API described in Documentation/ABI/testing/sysfs-platform-chipidea-usb2. [1] https://github.com/96boards/documentation/raw/master/ConsumerEdition/DragonBoard-410c/HardwareDocs/Schematics_DragonBoard.pdf Cc: Peter Rosin <peda@xxxxxxxxxx> Cc: Peter Chen <peter.chen@xxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: <devicetree@xxxxxxxxxxxxxxx> Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx> Signed-off-by: Yossi Mansharoff <yossim@xxxxxxxxxxxxxx> --- drivers/usb/chipidea/Kconfig | 2 ++ drivers/usb/chipidea/core.c | 5 +++++ drivers/usb/chipidea/host.c | 7 +++++++ drivers/usb/chipidea/udc.c | 13 ++++++++++++- include/linux/usb/chipidea.h | 2 ++ 5 files changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 785f0ed..6a8e635 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -3,6 +3,8 @@ config USB_CHIPIDEA depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA select EXTCON select RESET_CONTROLLER + select MULTIPLEXER + select MUX_GPIO help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 33ae87f..8fa0991 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -61,6 +61,7 @@ #include <linux/of.h> #include <linux/regulator/consumer.h> #include <linux/usb/ehci_def.h> +#include <linux/mux/consumer.h> #include "ci.h" #include "udc.h" @@ -687,6 +688,10 @@ static int ci_get_platdata(struct device *dev, if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL)) platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA; + platdata->usb_switch = devm_mux_control_get_optional(dev, "usb_switch"); + if (IS_ERR(platdata->usb_switch)) + return PTR_ERR(platdata->usb_switch); + ext_id = ERR_PTR(-ENODEV); ext_vbus = ERR_PTR(-ENODEV); if (of_property_read_bool(dev->of_node, "extcon")) { diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index af45aa32..d9d2d00 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -13,6 +13,7 @@ #include <linux/usb/hcd.h> #include <linux/usb/chipidea.h> #include <linux/regulator/consumer.h> +#include <linux/mux/consumer.h> #include "../host/ehci.h" @@ -161,6 +162,10 @@ static int host_start(struct ci_hdrc *ci) if (ci_otg_is_fsm_mode(ci)) { otg->host = &hcd->self; hcd->self.otg_port = 1; + } else { + ret = mux_control_select(ci->platdata->usb_switch, 1); + if (ret) + goto disable_reg; } } @@ -181,6 +186,8 @@ static void host_stop(struct ci_hdrc *ci) struct usb_hcd *hcd = ci->hcd; if (hcd) { + if (!ci_otg_is_fsm_mode(ci)) + mux_control_deselect(ci->platdata->usb_switch); if (ci->platdata->notify_event) ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_STOPPED_EVENT); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 9852ec5..209d3f6 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -19,6 +19,7 @@ #include <linux/usb/gadget.h> #include <linux/usb/otg-fsm.h> #include <linux/usb/chipidea.h> +#include <linux/mux/consumer.h> #include "ci.h" #include "udc.h" @@ -1965,16 +1966,26 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) static int udc_id_switch_for_device(struct ci_hdrc *ci) { + int ret = 0; + if (ci->is_otg) /* Clear and enable BSV irq */ hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, OTGSC_BSVIS | OTGSC_BSVIE); - return 0; + if (!ci_otg_is_fsm_mode(ci)) + ret = mux_control_select(ci->platdata->usb_switch, 0); + + if (ci->is_otg && ret) + hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS); + + return ret; } static void udc_id_switch_for_host(struct ci_hdrc *ci) { + mux_control_deselect(ci->platdata->usb_switch); + /* * host doesn't care B_SESSION_VALID event * so clear and disbale BSV irq diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 07f9936..9ea55a1 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -10,6 +10,7 @@ #include <linux/usb/otg.h> struct ci_hdrc; +struct mux_control; /** * struct ci_hdrc_cable - structure for external connector cable state tracking @@ -76,6 +77,7 @@ struct ci_hdrc_platform_data { /* VBUS and ID signal state tracking, using extcon framework */ struct ci_hdrc_cable vbus_extcon; struct ci_hdrc_cable id_extcon; + struct mux_control *usb_switch; u32 phy_clkgate_delay_us; }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
