[PATCH 03/11] usb: musb: remove adjust_channel_params() callback from musb_platform_ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now Blackfin support is removed, nobody uses adjust_channel_params() any
more, so remove it from struct musb_platform_ops.

Signed-off-by: Bin Liu <b-liu@xxxxxx>
---
 drivers/usb/musb/musb_core.h | 4 ----
 drivers/usb/musb/musbhsdma.c | 8 --------
 2 files changed, 12 deletions(-)

diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index a4bf1e9e2d2c..f57323e50e44 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -138,7 +138,6 @@ enum musb_g_ep0_state {
  * @recover:	platform-specific babble recovery
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
- * @adjust_channel_params: pre check for standard dma channel_program func
  * @pre_root_reset_end: called before the root usb port reset flag gets cleared
  * @post_root_reset_end: called after the root usb port reset flag gets cleared
  * @phy_callback: optional callback function for the phy to call
@@ -184,9 +183,6 @@ struct musb_platform_ops {
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
 
-	int	(*adjust_channel_params)(struct dma_channel *channel,
-				u16 packet_sz, u8 *mode,
-				dma_addr_t *dma_addr, u32 *len);
 	void	(*pre_root_reset_end)(struct musb *musb);
 	void	(*post_root_reset_end)(struct musb *musb);
 	int	(*phy_callback)(enum musb_vbus_id_status status);
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 57d416a110a5..a688f7f87829 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -199,14 +199,6 @@ static int dma_channel_program(struct dma_channel *channel,
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
-	/* Let targets check/tweak the arguments */
-	if (musb->ops->adjust_channel_params) {
-		int ret = musb->ops->adjust_channel_params(channel,
-			packet_sz, &mode, &dma_addr, &len);
-		if (ret)
-			return ret;
-	}
-
 	/*
 	 * The DMA engine in RTL1.8 and above cannot handle
 	 * DMA addresses that are not aligned to a 4 byte boundary.
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux