I noticed that when debugging some USB clocking issue that there weren't
many ways to tell what the state of the USB clocking system was. This
adds a few logging statements to see what the relevant code is trying to
do.
Signed-off-by: Marcin Ziemianowicz <marcin@xxxxxxxxxxxxxxxx>
---
drivers/clk/at91/clk-pll.c | 6 +++++-
drivers/clk/at91/clk-usb.c | 10 ++++++++--
drivers/usb/host/ohci-at91.c | 16 ++++++++++------
3 files changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 7d3223fc7161..534961766ae5 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -133,6 +133,7 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
{
struct clk_pll *pll = to_clk_pll(hw);
unsigned int pllr;
+ unsigned long recalcedrate;
u16 mul;
u8 div;
@@ -144,7 +145,10 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
if (!div || !mul)
return 0;
- return (parent_rate / div) * (mul + 1);
+ recalcedrate = (parent_rate / div) * (mul + 1);
+ pr_debug("clk-pll: calculating new rate, (%lu hz / %u) * %u = %lu hz\n",
+ parent_rate, div, mul, recalcedrate);
+ return recalcedrate;
}
static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 791770a563fc..2fa877e99bac 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -48,11 +48,15 @@ static unsigned long at91sam9x5_clk_usb_recalc_rate(struct clk_hw *hw,
struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
unsigned int usbr;
u8 usbdiv;
+ unsigned int calcdclock;
regmap_read(usb->regmap, AT91_PMC_USB, &usbr);
usbdiv = (usbr & AT91_PMC_OHCIUSBDIV) >> SAM9X5_USB_DIV_SHIFT;
- return DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
+ calcdclock = DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
+ pr_debug("clk-usb: calculating new rate, %lu hz / %u = %u hz\n",
+ parent_rate, usbdiv + 1, calcdclock);
+ return calcdclock;
}
static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
@@ -98,7 +102,6 @@ static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
if (!best_diff)
break;
}
-
if (best_rate < 0)
return best_rate;
@@ -142,6 +145,9 @@ static int at91sam9x5_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate,
if (div > SAM9X5_USB_MAX_DIV + 1 || !div)
return -EINVAL;
+ pr_debug("clk-usb: setting USB clock divider to %lu hz / %lu = %lu hz\n",
+ parent_rate, div, rate);
+
regmap_update_bits(usb->regmap, AT91_PMC_USB, AT91_PMC_OHCIUSBDIV,
(div - 1) << SAM9X5_USB_DIV_SHIFT);
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5ad9e9bdc8ee..c57a239918f9 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -70,11 +70,13 @@ static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst =
/*-------------------------------------------------------------------------*/
-static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91,
+ struct device *dev)
{
if (ohci_at91->clocked)
return;
+ dev_dbg(dev, "Enabling hclk, iclk, and setting fclk to 48 Mhz\n");
clk_set_rate(ohci_at91->fclk, 48000000);
clk_prepare_enable(ohci_at91->hclk);
clk_prepare_enable(ohci_at91->iclk);
@@ -82,11 +84,13 @@ static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
ohci_at91->clocked = true;
}
-static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91,
+ struct device *dev)
{
if (!ohci_at91->clocked)
return;
+ dev_dbg(dev, "Disabling hclk, iclk, and fclk\n");
clk_disable_unprepare(ohci_at91->fclk);
clk_disable_unprepare(ohci_at91->iclk);
clk_disable_unprepare(ohci_at91->hclk);
@@ -104,7 +108,7 @@ static void at91_start_hc(struct platform_device *pdev)
/*
* Start the USB clocks.
*/
- at91_start_clock(ohci_at91);
+ at91_start_clock(ohci_at91, &pdev->dev);
/*
* The USB host controller must remain in reset.
@@ -128,7 +132,7 @@ static void at91_stop_hc(struct platform_device *pdev)
/*
* Stop the USB clocks.
*/
- at91_stop_clock(ohci_at91);
+ at91_stop_clock(ohci_at91, &pdev->dev);
}
@@ -623,7 +627,7 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
- at91_stop_clock(ohci_at91);
+ at91_stop_clock(ohci_at91, dev);
}
return ret;
@@ -638,7 +642,7 @@ ohci_hcd_at91_drv_resume(struct device *dev)
if (ohci_at91->wakeup)
disable_irq_wake(hcd->irq);
- at91_start_clock(ohci_at91);
+ at91_start_clock(ohci_at91, dev);
ohci_resume(hcd, false);
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
