Hi > -----Original Message----- > From: Hans de Goede [mailto:hdegoede@xxxxxxxxxx] > Sent: 2018年4月3日 23:26 > To: Jun Li <jun.li@xxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx; > mark.rutland@xxxxxxx; heikki.krogerus@xxxxxxxxxxxxxxx > Cc: linux@xxxxxxxxxxxx; rmfrfs@xxxxxxxxx; yueyao.zhu@xxxxxxxxx; > linux-usb@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; dl-linux-imx > <linux-imx@xxxxxxx> > Subject: Re: [PATCH v2 2/5] usb: typec: fusb302: remove max_snk_* for sink > config > > Hi, > > On 23-03-18 15:58, Li Jun wrote: > > Since max_snk_* is to be deprecated, so remove max_snk_* by adding a > > variable PDO for sink config. > > > > Signed-off-by: Li Jun <jun.li@xxxxxxx> > > --- > > drivers/usb/typec/fusb302/fusb302.c | 51 > +++++++++++++++++++++++++++---------- > > 1 file changed, 37 insertions(+), 14 deletions(-) > > > > diff --git a/drivers/usb/typec/fusb302/fusb302.c > > b/drivers/usb/typec/fusb302/fusb302.c > > index 7036171..db4d9cd 100644 > > --- a/drivers/usb/typec/fusb302/fusb302.c > > +++ b/drivers/usb/typec/fusb302/fusb302.c > > @@ -120,6 +120,7 @@ struct fusb302_chip { > > enum typec_cc_polarity cc_polarity; > > enum typec_cc_status cc1; > > enum typec_cc_status cc2; > > + u32 snk_pdo[PDO_MAX_OBJECTS]; > > > > #ifdef CONFIG_DEBUG_FS > > struct dentry *dentry; > > @@ -1212,11 +1213,6 @@ static const u32 snk_pdo[] = { > > static const struct tcpc_config fusb302_tcpc_config = { > > .src_pdo = src_pdo, > > .nr_src_pdo = ARRAY_SIZE(src_pdo), > > - .snk_pdo = snk_pdo, > > - .nr_snk_pdo = ARRAY_SIZE(snk_pdo), > > - .max_snk_mv = 5000, > > - .max_snk_ma = 3000, > > - .max_snk_mw = 15000, > > .operating_snk_mw = 2500, > > .type = TYPEC_PORT_DRP, > > .data = TYPEC_PORT_DRD, > > @@ -1756,6 +1752,38 @@ static int init_gpio(struct fusb302_chip *chip) > > return 0; > > } > > > > +static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip) > > +{ > > + struct device *dev = chip->dev; > > + u32 mv, ma, mw, min_mv; > > + unsigned int i; > > + > > + /* Copy the static snk pdo */ > > + for (i = 0; i < ARRAY_SIZE(snk_pdo); i++) > > + chip->snk_pdo[i] = snk_pdo[i]; > > The static snk PDO is constant and only contains: > PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), > > So you can just do: > > chip->snk_pdo[0] = PDO_FIXED(5000, 400, PDO_FIXED_FLAGS); > > Here. > > > + > > + if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &mv) || > > + device_property_read_u32(dev, "fcs,max-sink-microamp", &ma) || > > + device_property_read_u32(dev, "fcs,max-sink-microwatt", &mw)) > > You can drop the reading of "fcs,max-sink-microwatt" here, it was only ever > added because the tcpm code used to depend on max_mw being set, now that > that is no longer the case, we don't need it. > > So this entire function can be simplified to: > > static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip) { > struct device *dev = chip->dev; > u32 max_uv, max_ua; > > chip->snk_pdo[0] = PDO_FIXED(5000, 400, PDO_FIXED_FLAGS); > > if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &max_uv) || > device_property_read_u32(dev, "fcs,max-sink-microamp", &max_ua)) > return 1; > > chip->snk_pdo[1] = PDO_VAR(5000, max_uv / 1000, max_ua / 1000); > return 2; > } OK, I will change in v3. Thanks Jun > > > @@ -1784,18 +1812,13 @@ static int fusb302_probe(struct i2c_client *client, > > chip->tcpc_dev.config = &chip->tcpc_config; > > mutex_init(&chip->lock); > > > > - if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v)) > > - chip->tcpc_config.max_snk_mv = v / 1000; > > - > > - if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v)) > > - chip->tcpc_config.max_snk_ma = v / 1000; > > - > > - if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v)) > > - chip->tcpc_config.max_snk_mw = v / 1000; > > - > > if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) > > chip->tcpc_config.operating_snk_mw = v / 1000; > > > > + /* Composite sink PDO */ > > + chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip); > > + chip->tcpc_config.snk_pdo = chip->snk_pdo; > > + > > /* > > * Devicetree platforms should get extcon via phandle (not yet > > * supported). On ACPI platforms, we get the name from a device prop. > > > > Regards, > > Hans ��.n��������+%������w��{.n�����{���)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
