On Fri, 02 Mar 2018 17:38:26 +0000, Bockholdt Arne wrote: Hi Arne, > > On Thu, 2018-03-01 at 17:37 +0000, Marc Zyngier wrote: > > On 01/03/18 08:01, Bockholdt Arne wrote: > > > > > > On Thu, 2018-02-15 at 19:29 +0000, Marc Zyngier wrote: > > > > [+ Ard, who helped me chasing the initial issue] > > > > > > > > On 15/02/18 06:43, Bockholdt Arne wrote: > > > > > Hi all, > > > > > > > > > > on our Intel Atom C2578 server with a SuperMicro A1SAi board > > > > > and a > > > > > Renesas uPD720201 USB 3.0 host controller the controller has > > > > > stopped > > > > > working since kernel 4.13.x. Before that kernel the dmesg > > > > > messages > > > > > from > > > > > XHCI were: > > > > > > > > > > dmesg-4.12.1-serverv4.log:xhci_hcd 0000:03:00.0: xHCI Host > > > > > Controller > > > > > dmesg-4.12.1-serverv4.log:xhci_hcd 0000:03:00.0: new USB bus > > > > > registered, > > > > > assigned bus number 2 > > > > > dmesg-4.12.1-serverv4.log:xhci_hcd 0000:03:00.0: hcc params > > > > > 0x014051cf > > > > > hci version 0x100 quirks 0x00000010 > > > > > dmesg-4.12.1-serverv4.log:usb usb2: Manufacturer: Linux 4.12.1- > > > > > serverv4 > > > > > xhci-hcd > > > > > dmesg-4.12.1-serverv4.log:xhci_hcd 0000:03:00.0: xHCI Host > > > > > Controller > > > > > dmesg-4.12.1-serverv4.log:xhci_hcd 0000:03:00.0: new USB bus > > > > > registered, > > > > > assigned bus number 3 > > > > > dmesg-4.12.1-serverv4.log:usb usb3: Manufacturer: Linux 4.12.1- > > > > > serverv4 > > > > > xhci-hcd > > > > > > > > > > After that the message look like that: > > > > > > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: Resetting > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: Refused to > > > > > change > > > > > power > > > > > state, currently in D3 > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: xHCI Host > > > > > Controller > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: new USB bus > > > > > registered, > > > > > assigned bus number 2 > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: Host halt > > > > > failed, > > > > > -19 > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: can't setup: > > > > > -19 > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: USB bus 2 > > > > > deregistered > > > > > dmesg-4.13.1-serverv4.log:xhci_hcd 0000:03:00.0: init > > > > > 0000:03:00.0 > > > > > fail, -19 > > > > > > > > > > I've tested it with 4.15.3 too, it's still the same. I've > > > > > narrowed > > > > > it > > > > > down to the following patch: > > > > > > > > > > commit 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 > > > > > Author: Marc Zyngier <marc.zyngier@xxxxxxx <mailto:marc.zyngier > > > > > @arm > > > > > .com>> > > > > > Date: Tue Aug 1 20:11:08 2017 -0500 > > > > > > > > > > xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA > > > > > issue > > > > > > > > > > Reverting the patch on top of 4.15.3 restores the USB3 > > > > > functionality on > > > > > our server. Please let me know if there is anything I can do to > > > > > fix > > > > > the > > > > > problem. Thank you. > > > > > > > > Hi Arne, > > > > > > > > This looks pretty bad. I suspect that once reset, the firmware is > > > > lost. > > > > I'll try to write a patch dumping some information about it. > > > > > > > > Ard: Do you know if the Cello board has a SPI flash connected to > > > > the > > > > Renesas chip, from which it would load the firmware? > > > > > > > > Another possibility is that power management kicks in, and that > > > > the > > > > endpoint is stuck there. Could also be firmware related, but not > > > > only. > > > > I'd welcome any idea on the subject, as I cannot reproduce this > > > > issue > > > > on > > > > the HW I have. > > > > > > > > It we cannot work out what exactly is causing this, we may have > > > > to > > > > default to not resetting the part and rely on a command-line > > > > option > > > > to > > > > do it... I can't say I'm a fan. > > > > > > > > Thanks, > > > > > > > > M. > > > > > > > > > > Hi Marc, > > > > > > I've tested it with 4.15.7 and it's still there. Is there anything > > > that > > > I can do to help fixing this problem? > > > > Would you mind trying the following patch and let me know if it > > helps? > > It is not exactly pretty, but we can polish it if that solves your > > issue. [...] > I've applied your patch on top of 4.15.7 and tried it on the server, > unfortunately the problem is still there. Here's the output from dmesg: > > [ 1.570115] xhci_hcd 0000:03:00.0: Found a 64bit address in ERSTBA 4 > [ 1.570120] xhci_hcd 0000:03:00.0: Resetting > [ 2.668066] xhci_hcd 0000:03:00.0: Refused to change power state, > currently in D3 > [ 2.668215] xhci_hcd 0000:03:00.0: xHCI Host Controller > [ 2.668225] xhci_hcd 0000:03:00.0: new USB bus registered, assigned > bus number 2 > [ 2.668240] xhci_hcd 0000:03:00.0: Host halt failed, -19 > [ 2.668242] xhci_hcd 0000:03:00.0: can't setup: -19 > [ 2.668299] xhci_hcd 0000:03:00.0: USB bus 2 deregistered > [ 2.668354] xhci_hcd 0000:03:00.0: init 0000:03:00.0 fail, -19 > > If you need more informations to find the cause, I will gladly provide > it. I finally found some time to work on this, and came up with an alternative approach (it turns out that this chip is even more braindead than I thought). It is slightly scary, in the sense that the USB controller seems to perform memory accesses even when halted, and can generate faults, but it works just fine on my system. And with this, we can drop the hard reset at boot time. I'm still on the fence to limit it to systems with an iommu though. Could you please give this branch[1] a go? Thanks, M. [1] git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git usb/uPD720202-reset -- Jazz is not dead, it just smell funny. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
