[PATCH v4] usb: core: introduce per-port over-current counters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Richard Leitner <richard.leitner@xxxxxxxxxxx>

For some userspace applications information on the number of
over-current conditions at specific USB hub ports is relevant.

In our case we have a series of USB hardware (using the cp210x driver)
which communicates using a proprietary protocol. These devices sometimes
trigger an over-current situation on some hubs. In case of such an
over-current situation the USB devices offer an interface for reducing
the max used power. As these conditions are quite rare and imply
performance reductions of the device we don't want to reduce the max
power always.

Therefore give user-space applications the possibility to react
adequately by introducing an over_current_counter in the usb port struct
which is exported via sysfs.

Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>
---
Changes v4:
	- reintroduce forgotten Changelog
Changes v3:
	- Improve sysfs file description as recommended by greg k-h
Changes v2:
	- rename oc_count to over_current_count
	- add entry to Documentation/ABI
	- add detailled description to commit message
---
 Documentation/ABI/testing/sysfs-bus-usb | 10 ++++++++++
 drivers/usb/core/hub.c                  |  4 +++-
 drivers/usb/core/hub.h                  |  1 +
 drivers/usb/core/port.c                 | 10 ++++++++++
 4 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 0bd731cbb50c..c702c78f24d8 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -189,6 +189,16 @@ Description:
 		The file will read "hotplug", "wired" and "not used" if the
 		information is available, and "unknown" otherwise.
 
+What:		/sys/bus/usb/devices/.../(hub interface)/portX/over_current_count
+Date:		February 2018
+Contact:	Richard Leitner <richard.leitner@xxxxxxxxxxx>
+Description:
+		Most hubs are able to detect over-current situations on their
+		ports and report them to the kernel. This attribute is to expose
+		the number of over-current situation occurred on a specific port
+		to user space. This file will contain an unsigned 32 bit value
+		which wraps to 0 after its maximum is reached.
+
 What:		/sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
 Date:		November 2015
 Contact:	Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c5c1f6cf3228..6f779b518e75 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5104,8 +5104,10 @@ static void port_event(struct usb_hub *hub, int port1)
 
 	if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
 		u16 status = 0, unused;
+		port_dev->over_current_count++;
 
-		dev_dbg(&port_dev->dev, "over-current change\n");
+		dev_dbg(&port_dev->dev, "over-current change #%u\n",
+			port_dev->over_current_count);
 		usb_clear_port_feature(hdev, port1,
 				USB_PORT_FEAT_C_OVER_CURRENT);
 		msleep(100);	/* Cool down */
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 2a700ccc868c..78d7f4dad618 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -100,6 +100,7 @@ struct usb_port {
 	unsigned int is_superspeed:1;
 	unsigned int usb3_lpm_u1_permit:1;
 	unsigned int usb3_lpm_u2_permit:1;
+	unsigned int over_current_count;
 };
 
 #define to_usb_port(_dev) \
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 1a01e9ad3804..6979bde87d31 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -41,6 +41,15 @@ static ssize_t connect_type_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(connect_type);
 
+static ssize_t over_current_count_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+
+	return sprintf(buf, "%u\n", port_dev->over_current_count);
+}
+static DEVICE_ATTR_RO(over_current_count);
+
 static ssize_t usb3_lpm_permit_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
@@ -109,6 +118,7 @@ static DEVICE_ATTR_RW(usb3_lpm_permit);
 
 static struct attribute *port_dev_attrs[] = {
 	&dev_attr_connect_type.attr,
+	&dev_attr_over_current_count.attr,
 	NULL,
 };
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux