This patch series adds new updates and some fixes for DWC_usb31. Changes in v5: - Remove isoc workaround patches from series - Remove "usb: core: urb: Check SSP isoc ep comp descriptor" from series Changes in v4: - Correctly refer "databook" as "programming guide" - Document more detail about enabling of ESS periodic tx/rx threshold Changes in v3: - Add "usb: dwc3: Check controller type before setting speed" to series Changes in v2: - Add another patch to the series to increase mass_storage max_speed - Separate "usb: dwc3: ep0: Reset TRB counter for ep0 IN" from series - Separate "usb: dwc3: gadget: Set maxpacket size for ep0 IN" from series - Use msleep() instead of mdelay() for SoftReset PHY sync delay - Rename new USB31 macros from DWC3_USB31_* to DWC31_* - Rename device properties and replace '_' with '-' - Minor fixes in the commit messages Thinh Nguyen (10): usb: dwc3: Add SoftReset PHY synchonization delay usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields usb: dwc3: Check IP revision for GTXFIFOSIZ usb: dwc3: Add DWC_usb31 GRXTHRCFG bit fields usb: dwc3: gadget: Check IP revision for GRXTHRCFG usb: dwc3: Add DWC_usb31 GTXTHRCFG reg fields usb: dwc3: Make TX/RX threshold configurable usb: dwc3: Check for ESS TX/RX threshold config usb: dwc3: Dump LSP and BMU debug info usb: dwc3: Check controller type before setting speed Documentation/devicetree/bindings/usb/dwc3.txt | 16 ++++++ drivers/usb/dwc3/core.c | 68 +++++++++++++++++++++++++- drivers/usb/dwc3/core.h | 35 +++++++++++++ drivers/usb/dwc3/debugfs.c | 5 ++ drivers/usb/dwc3/gadget.c | 16 ++++-- 5 files changed, 136 insertions(+), 4 deletions(-) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
