On Tue, Feb 27, 2018 at 08:11:29AM +0100, Andrzej Hajda wrote: > These bindings allow to describe most known standard USB connectors > and it should be possible to extend it if necessary. > USB connectors, beside USB can be used to route other protocols, > for example UART, Audio, MHL. In such case every device passing data > through the connector should have appropriate graph bindings. > > Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> > --- > v4: > - improved 'type' description (Rob), > - improved description of 2nd example (Rob). > v3: > - removed MHL port (samsung connector will have separate bindings), > - added 2nd example for USB-C, > - improved formatting. > v2: > - moved connector type(A,B,C) to compatible string (Rob), > - renamed size property to type (Rob), > - changed type description to be less confusing (Laurent), > - removed vendor specific compatibles (implied by graph port number), > - added requirement of connector being a child of IC (Rob), > - removed max-mode (subtly suggested by Rob, it should be detected anyway > by USB Controller in runtime, downside is that device is not able to > report its real capabilities, maybe better would be to make it optional(?)), > - assigned port numbers to data buses (Rob). > > Regards > Andrzej > --- > .../bindings/connector/usb-connector.txt | 75 ++++++++++++++++++++++ > 1 file changed, 75 insertions(+) > create mode 100644 Documentation/devicetree/bindings/connector/usb-connector.txt Reviewed-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
