Use helper functions to determine the type and direction of an endpoint instead
of fiddling with bEndpointAddress and bmAttributes
Signed-off-by: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
---
drivers/usb/gadget/fsl_usb2_udc.c | 18 ++++++++----------
1 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 9d7b95d..9d26acf 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -468,7 +468,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
zlt = 1;
/* Assume the max packet size from gadget is always correct */
- switch (desc->bmAttributes & 0x03) {
+ switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
@@ -499,25 +499,23 @@ static int fsl_ep_enable(struct usb_ep *_ep,
/* Init EPx Queue Head (Ep Capabilites field in QH
* according to max, zlt, mult) */
struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
- (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
+ (unsigned char) (usb_endpoint_dir_in(desc)
? USB_SEND : USB_RECV),
- (unsigned char) (desc->bmAttributes
- & USB_ENDPOINT_XFERTYPE_MASK),
+ (unsigned char) (usb_endpoint_type(desc)),
max, zlt, mult);
/* Init endpoint ctrl register */
dr_ep_setup((unsigned char) ep_index(ep),
- (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
+ (unsigned char) (usb_endpoint_dir_in(desc)
? USB_SEND : USB_RECV),
- (unsigned char) (desc->bmAttributes
- & USB_ENDPOINT_XFERTYPE_MASK));
+ (unsigned char) (usb_endpoint_type(desc)));
spin_unlock_irqrestore(&udc->lock, flags);
retval = 0;
VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name,
ep->desc->bEndpointAddress & 0x0f,
- (desc->bEndpointAddress & USB_DIR_IN)
+ usb_endpoint_dir_in(desc)
? "in" : "out", max);
en_done:
return retval;
@@ -776,7 +774,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
VDBG("%s, bad ep", __func__);
return -EINVAL;
}
- if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (usb_endpoint_xfer_isoc(ep->desc)) {
if (req->req.length > ep->ep.maxpacket)
return -EMSGSIZE;
is_iso = 1;
@@ -932,7 +930,7 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
goto out;
}
- if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (usb_endpoint_xfer_isoc(ep->desc)) {
status = -EOPNOTSUPP;
goto out;
}
--
1.6.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
