Hi Balbi,
I rebased this commit to your testing/next (see below).
Please skip 05/06 patch in this series, it was already applied via
"[PATCH v2 00/49] usb: dwc2: fixes, enhancements and new features "
patch series.
Please ignore "[PATCH v2 00/49] usb: dwc2: fixes, enhancements and new
features " patch series.
Please apply this rebased patch.
Also, please, reapply "[PATCH 09/17] usb: dwc2: Make dwc2_force_mode()
static" which was dropped because of having dependancy from this pacth.
Thanks a lot.
On 1/16/2018 16:05, Grigor Tovmasyan wrote:
> From: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
>
> If the dr_mode is USB_DR_MODE_OTG, forcing the mode is needed during
> driver probe to get the host and device specific HW parameters. Then we
> clear the force mode bits so that the core operates in OTG mode.
>
> The force mode bits should not be touched at any other time during the
> driver lifetime and they should be preserved whenever the GUSBCFG
> register is written to. The force mode bit values will persist across
> soft resets of the core.
>
> If the dr_mode is either USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL, the
> force mode is set just once at probe to configure the core as either a
> host or peripheral.
>
> Given the above, we no longer need any other reset delays, force delays,
> or any forced modes anywhere else in the driver. So replace all calls to
> dwc2_core_reset_and_force_dr_mode() with dwc2_core_reset() and remove
> all other unnecessary delays.
>
> Also remove the dwc2_force_mode_if_needed() function since the "if
> needed" part is already taken care of by the polling in
> dwc2_force_mode().
>
> Finally, remove all other calls to dwc2_clear_force_mode().
>
> Tested-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
> Signed-off-by: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
> Signed-off-by: Grigor Tovmasyan <tovmasya@xxxxxxxxxxxx>
> ---
> drivers/usb/dwc2/core.c | 61 +++++++++++----------------------------------
> drivers/usb/dwc2/core.h | 4 +--
> drivers/usb/dwc2/hcd.c | 6 ++---
> drivers/usb/dwc2/params.c | 12 ++-------
> drivers/usb/dwc2/platform.c | 9 ++++++-
> 5 files changed, 28 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> index 82a7d98c3436..dbca3b8890da 100644
> --- a/drivers/usb/dwc2/core.c
> +++ b/drivers/usb/dwc2/core.c
> @@ -376,14 +376,14 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
> return 0;
> }
>
> -/*
> - * Force the mode of the controller.
> +/**
> + * dwc2_force_mode() - Force the mode of the controller.
> *
> * Forcing the mode is needed for two cases:
> *
> * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
> * controller to stay in a particular mode regardless of ID pin
> - * changes. We do this usually after a core reset.
> + * changes. We do this once during probe.
> *
> * 2) During probe we want to read reset values of the hw
> * configuration registers that are only available in either host or
> @@ -400,7 +400,7 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
> * the filter is configured and enabled. We poll the current mode of
> * the controller to account for this delay.
> */
> -static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
> +void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
> {
> u32 gusbcfg;
> u32 set;
> @@ -412,17 +412,17 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
> * Force mode has no effect if the hardware is not OTG.
> */
> if (!dwc2_hw_is_otg(hsotg))
> - return false;
> + return;
>
> /*
> * If dr_mode is either peripheral or host only, there is no
> * need to ever force the mode to the opposite mode.
> */
> if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
> - return false;
> + return;
>
> if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
> - return false;
> + return;
>
> gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
>
> @@ -434,7 +434,7 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
> dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
>
> dwc2_wait_for_mode(hsotg, host);
> - return true;
> + return;
> }
>
> /**
> @@ -450,6 +450,11 @@ void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
> {
> u32 gusbcfg;
>
> + if (!dwc2_hw_is_otg(hsotg))
> + return;
> +
> + dev_dbg(hsotg->dev, "Clearing force mode bits\n");
> +
> gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
> gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
> @@ -464,16 +469,13 @@ void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
> */
> void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
> {
> - bool ret;
> -
> switch (hsotg->dr_mode) {
> case USB_DR_MODE_HOST:
> - ret = dwc2_force_mode(hsotg, true);
> /*
> * NOTE: This is required for some rockchip soc based
> * platforms on their host-only dwc2.
> */
> - if (!ret)
> + if (!dwc2_hw_is_otg(hsotg))
> msleep(50);
>
> break;
> @@ -490,25 +492,6 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
> }
> }
>
> -/*
> - * Do core a soft reset of the core. Be careful with this because it
> - * resets all the internal state machines of the core.
> - *
> - * Additionally this will apply force mode as per the hsotg->dr_mode
> - * parameter.
> - */
> -int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg)
> -{
> - int retval;
> -
> - retval = dwc2_core_reset(hsotg, false);
> - if (retval)
> - return retval;
> -
> - dwc2_force_dr_mode(hsotg);
> - return 0;
> -}
> -
> /**
> * dwc2_dump_host_registers() - Prints the host registers
> *
> @@ -736,22 +719,6 @@ void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
> udelay(1);
> }
>
> -/*
> - * Forces either host or device mode if the controller is not
> - * currently in that mode.
> - *
> - * Returns true if the mode was forced.
> - */
> -bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host)
> -{
> - if (host && dwc2_is_host_mode(hsotg))
> - return false;
> - else if (!host && dwc2_is_device_mode(hsotg))
> - return false;
> -
> - return dwc2_force_mode(hsotg, host);
> -}
> -
> bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
> {
> if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff)
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 232a3aa8c9b1..7439aa6e35f6 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -1105,12 +1105,10 @@ static inline bool dwc2_is_hs_iot(struct dwc2_hsotg *hsotg)
> * and the DWC_otg controller
> */
> int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait);
> -int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg);
> int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg);
> int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore);
>
> -bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host);
> -void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg);
> +void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host);
> void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
>
> bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg);
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index 7b6eb0ad513b..614bb9603def 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -138,7 +138,7 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
> dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>
> /* Reset after a PHY select */
> - retval = dwc2_core_reset_and_force_dr_mode(hsotg);
> + retval = dwc2_core_reset(hsotg, false);
>
> if (retval) {
> dev_err(hsotg->dev,
> @@ -236,7 +236,7 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
> dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>
> /* Reset after setting the PHY parameters */
> - retval = dwc2_core_reset_and_force_dr_mode(hsotg);
> + retval = dwc2_core_reset(hsotg, false);
> if (retval) {
> dev_err(hsotg->dev,
> "%s: Reset failed, aborting", __func__);
> @@ -2256,7 +2256,7 @@ static int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
> * needed to in order to properly detect various parameters).
> */
> if (!initial_setup) {
> - retval = dwc2_core_reset_and_force_dr_mode(hsotg);
> + retval = dwc2_core_reset(hsotg, false);
> if (retval) {
> dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
> __func__);
> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> index 7c20c8e31179..fc4d93d78ec3 100644
> --- a/drivers/usb/dwc2/params.c
> +++ b/drivers/usb/dwc2/params.c
> @@ -580,19 +580,15 @@ static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg)
> struct dwc2_hw_params *hw = &hsotg->hw_params;
> u32 gnptxfsiz;
> u32 hptxfsiz;
> - bool forced;
>
> if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
> return;
>
> - forced = dwc2_force_mode_if_needed(hsotg, true);
> + dwc2_force_mode(hsotg, true);
>
> gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
> hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
>
> - if (forced)
> - dwc2_clear_force_mode(hsotg);
> -
> hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
> FIFOSIZE_DEPTH_SHIFT;
> hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
> @@ -607,19 +603,15 @@ static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg)
> static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
> {
> struct dwc2_hw_params *hw = &hsotg->hw_params;
> - bool forced;
> u32 gnptxfsiz;
>
> if (hsotg->dr_mode == USB_DR_MODE_HOST)
> return;
>
> - forced = dwc2_force_mode_if_needed(hsotg, false);
> + dwc2_force_mode(hsotg, false);
>
> gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
>
> - if (forced)
> - dwc2_clear_force_mode(hsotg);
> -
> hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
> FIFOSIZE_DEPTH_SHIFT;
> }
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index 74be91c559c8..1a733b9ddab0 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -415,13 +415,20 @@ static int dwc2_driver_probe(struct platform_device *dev)
> * Reset before dwc2_get_hwparams() then it could get power-on real
> * reset value form registers.
> */
> - dwc2_core_reset_and_force_dr_mode(hsotg);
> + retval = dwc2_core_reset(hsotg, false);
> + if (retval)
> + goto error;
>
> /* Detect config values from hardware */
> retval = dwc2_get_hwparams(hsotg);
> if (retval)
> goto error;
>
> + /*
> + * For OTG cores, set the force mode bits to reflect the value
> + * of dr_mode. Force mode bits should not be touched at any
> + * other time after this.
> + */
> dwc2_force_dr_mode(hsotg);
>
> retval = dwc2_init_params(hsotg);
>
From: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
If the dr_mode is USB_DR_MODE_OTG, forcing the mode is needed during
driver probe to get the host and device specific HW parameters. Then we
clear the force mode bits so that the core operates in OTG mode.
The force mode bits should not be touched at any other time during the
driver lifetime and they should be preserved whenever the GUSBCFG
register is written to. The force mode bit values will persist across
soft resets of the core.
If the dr_mode is either USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL, the
force mode is set just once at probe to configure the core as either a
host or peripheral.
Given the above, we no longer need any other reset delays, force delays,
or any forced modes anywhere else in the driver. So replace all calls to
dwc2_core_reset_and_force_dr_mode() with dwc2_core_reset() and remove
all other unnecessary delays.
Also remove the dwc2_force_mode_if_needed() function since the "if
needed" part is already taken care of by the polling in
dwc2_force_mode().
Finally, remove all other calls to dwc2_clear_force_mode().
Tested-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
Signed-off-by: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
Signed-off-by: Grigor Tovmasyan <tovmasya@xxxxxxxxxxxx>
---
drivers/usb/dwc2/core.c | 60
+++++++++++----------------------------------
drivers/usb/dwc2/core.h | 4 +--
drivers/usb/dwc2/hcd.c | 6 ++---
drivers/usb/dwc2/params.c | 12 ++-------
drivers/usb/dwc2/platform.c | 9 ++++++-
5 files changed, 28 insertions(+), 63 deletions(-)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 346150922dbd..67987c338ed2 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -367,14 +367,14 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool
skip_wait)
return 0;
}
-/*
- * Force the mode of the controller.
+/**
+ * dwc2_force_mode() - Force the mode of the controller.
*
* Forcing the mode is needed for two cases:
*
* 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
* controller to stay in a particular mode regardless of ID pin
- * changes. We do this usually after a core reset.
+ * changes. We do this once during probe.
*
* 2) During probe we want to read reset values of the hw
* configuration registers that are only available in either host or
@@ -391,7 +391,7 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool
skip_wait)
* the filter is configured and enabled. We poll the current mode of
* the controller to account for this delay.
*/
-static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
+void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
{
u32 gusbcfg;
u32 set;
@@ -403,17 +403,17 @@ static bool dwc2_force_mode(struct dwc2_hsotg
*hsotg, bool host)
* Force mode has no effect if the hardware is not OTG.
*/
if (!dwc2_hw_is_otg(hsotg))
- return false;
+ return;
/*
* If dr_mode is either peripheral or host only, there is no
* need to ever force the mode to the opposite mode.
*/
if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
- return false;
+ return;
if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
- return false;
+ return;
gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
@@ -425,7 +425,7 @@ static bool dwc2_force_mode(struct dwc2_hsotg
*hsotg, bool host)
dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
dwc2_wait_for_mode(hsotg, host);
- return true;
+ return;
}
/**
@@ -441,6 +441,11 @@ void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
{
u32 gusbcfg;
+ if (!dwc2_hw_is_otg(hsotg))
+ return;
+
+ dev_dbg(hsotg->dev, "Clearing force mode bits\n");
+
gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
@@ -455,16 +460,13 @@ void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
*/
void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
{
- bool ret;
-
switch (hsotg->dr_mode) {
case USB_DR_MODE_HOST:
- ret = dwc2_force_mode(hsotg, true);
/*
* NOTE: This is required for some rockchip soc based
* platforms on their host-only dwc2.
*/
- if (!ret)
+ if (!dwc2_hw_is_otg(hsotg))
msleep(50);
break;
@@ -481,24 +483,6 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
}
}
-/*
- * Do core a soft reset of the core. Be careful with this because it
- * resets all the internal state machines of the core.
- *
- * Additionally this will apply force mode as per the hsotg->dr_mode
- * parameter.
- */
-int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg)
-{
- int retval;
-
- retval = dwc2_core_reset(hsotg, false);
- if (retval)
- return retval;
-
- dwc2_force_dr_mode(hsotg);
- return 0;
-}
/*
* dwc2_enable_acg - enable active clock gating feature
@@ -736,22 +720,6 @@ void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
udelay(1);
}
-/*
- * Forces either host or device mode if the controller is not
- * currently in that mode.
- *
- * Returns true if the mode was forced.
- */
-bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host)
-{
- if (host && dwc2_is_host_mode(hsotg))
- return false;
- else if (!host && dwc2_is_device_mode(hsotg))
- return false;
-
- return dwc2_force_mode(hsotg, host);
-}
-
bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
{
if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 96799a399393..eb16a0d95e07 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1116,12 +1116,10 @@ static inline bool dwc2_is_hs_iot(struct
dwc2_hsotg *hsotg)
* and the DWC_otg controller
*/
int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait);
-int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg);
int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg);
int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore);
-bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host);
-void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg);
+void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host);
void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index bbd3185a7364..1acfd082c358 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -141,7 +141,7 @@ static int dwc2_fs_phy_init(struct dwc2_hsotg
*hsotg, bool select_phy)
dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
/* Reset after a PHY select */
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+ retval = dwc2_core_reset(hsotg, false);
if (retval) {
dev_err(hsotg->dev,
@@ -239,7 +239,7 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg
*hsotg, bool select_phy)
dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
/* Reset after setting the PHY parameters */
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+ retval = dwc2_core_reset(hsotg, false);
if (retval) {
dev_err(hsotg->dev,
"%s: Reset failed, aborting", __func__);
@@ -2270,7 +2270,7 @@ static int dwc2_core_init(struct dwc2_hsotg
*hsotg, bool initial_setup)
* needed to in order to properly detect various parameters).
*/
if (!initial_setup) {
- retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+ retval = dwc2_core_reset(hsotg, false);
if (retval) {
dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
__func__);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 827f7f81a27c..e7c23cb25e84 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -593,19 +593,15 @@ static void dwc2_get_host_hwparams(struct
dwc2_hsotg *hsotg)
struct dwc2_hw_params *hw = &hsotg->hw_params;
u32 gnptxfsiz;
u32 hptxfsiz;
- bool forced;
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
return;
- forced = dwc2_force_mode_if_needed(hsotg, true);
+ dwc2_force_mode(hsotg, true);
gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
- if (forced)
- dwc2_clear_force_mode(hsotg);
-
hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
FIFOSIZE_DEPTH_SHIFT;
hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
@@ -620,14 +616,13 @@ static void dwc2_get_host_hwparams(struct
dwc2_hsotg *hsotg)
static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
{
struct dwc2_hw_params *hw = &hsotg->hw_params;
- bool forced;
u32 gnptxfsiz;
int fifo, fifo_count;
if (hsotg->dr_mode == USB_DR_MODE_HOST)
return;
- forced = dwc2_force_mode_if_needed(hsotg, false);
+ dwc2_force_mode(hsotg, false);
gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
@@ -639,9 +634,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg
*hsotg)
FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT;
}
- if (forced)
- dwc2_clear_force_mode(hsotg);
-
hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
FIFOSIZE_DEPTH_SHIFT;
}
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 65e1af5e491a..e4e1eee2f40a 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -427,13 +427,20 @@ static int dwc2_driver_probe(struct
platform_device *dev)
* Reset before dwc2_get_hwparams() then it could get power-on real
* reset value form registers.
*/
- dwc2_core_reset_and_force_dr_mode(hsotg);
+ retval = dwc2_core_reset(hsotg, false);
+ if (retval)
+ goto error;
/* Detect config values from hardware */
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
+ /*
+ * For OTG cores, set the force mode bits to reflect the value
+ * of dr_mode. Force mode bits should not be touched at any
+ * other time after this.
+ */
dwc2_force_dr_mode(hsotg);
retval = dwc2_init_params(hsotg);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
