When adding runtime PM support to the Tegra XHCI driver, it is desirable
to move the function calls to enable the clocks, regulators and PHY from
the tegra_xusb_probe into the runtime PM handlers. Currently, the
clocks, regulators and PHY are all enabled before we call
usb_create_hcd() in tegra_xusb_probe(), however, we cannot call
pm_runtime_get_sync() at this point because the platform device data is
not yet initialised. Fortunately, the function usb_create_hcd() can be
called before we enable the clocks, regulators and PHY and so prepare
for adding runtime PM support, by moving the call to usb_create_hcd()
before we enable the hardware.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
drivers/usb/host/xhci-tegra.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 2c076ea80522..02b0b24faa58 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1054,10 +1054,23 @@ static int tegra_xusb_probe(struct platform_device *pdev)
}
}
+ tegra->hcd = usb_create_hcd(&tegra_xhci_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!tegra->hcd) {
+ err = -ENOMEM;
+ goto put_padctl;
+ }
+
+ /*
+ * This must happen after usb_create_hcd(), because usb_create_hcd()
+ * will overwrite the drvdata of the device with the hcd it creates.
+ */
+ platform_set_drvdata(pdev, tegra);
+
err = tegra_xusb_clk_enable(tegra);
if (err) {
dev_err(&pdev->dev, "failed to enable clocks: %d\n", err);
- goto put_padctl;
+ goto put_usb2;
}
err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies);
@@ -1080,19 +1093,6 @@ static int tegra_xusb_probe(struct platform_device *pdev)
goto disable_phy;
}
- tegra->hcd = usb_create_hcd(&tegra_xhci_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!tegra->hcd) {
- err = -ENOMEM;
- goto disable_phy;
- }
-
- /*
- * This must happen after usb_create_hcd(), because usb_create_hcd()
- * will overwrite the drvdata of the device with the hcd it creates.
- */
- platform_set_drvdata(pdev, tegra);
-
tegra->hcd->regs = tegra->regs;
tegra->hcd->rsrc_start = regs->start;
tegra->hcd->rsrc_len = resource_size(regs);
@@ -1100,7 +1100,7 @@ static int tegra_xusb_probe(struct platform_device *pdev)
err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED);
if (err < 0) {
dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err);
- goto put_usb2;
+ goto disable_phy;
}
device_wakeup_enable(tegra->hcd->self.controller);
@@ -1155,14 +1155,14 @@ static int tegra_xusb_probe(struct platform_device *pdev)
usb_put_hcd(xhci->shared_hcd);
remove_usb2:
usb_remove_hcd(tegra->hcd);
-put_usb2:
- usb_put_hcd(tegra->hcd);
disable_phy:
tegra_xusb_phy_disable(tegra);
disable_regulator:
regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
disable_clk:
tegra_xusb_clk_disable(tegra);
+put_usb2:
+ usb_put_hcd(tegra->hcd);
put_padctl:
tegra_xusb_padctl_put(tegra->padctl);
return err;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
