Re: High CPU load produced by USB (DW2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8 February 2018 at 12:02, Minas Harutyunyan
<Minas.Harutyunyan@xxxxxxxxxxxx> wrote:
> Hi Mirza,
>
> On 2/7/2018 1:49 PM, Mirza Krak wrote:

< snip >

>
> Could you please provide additional info:
> 1. Does your core support descriptor DMA mode? (bits 31 and 30 of GHWCFG4).
> 2. Version of core (GSNPSID)?

It does seem to support descriptor DMA mode, and content of both
GHWCFG4 and GSNPSID are posted below.

root@esp5-d1:~# dmesg | grep -E "GHWCFG4|GSNPSID"
[    1.109298] dwc2 ff540000.usb: GSNPSID @0xF0940040 : 0x4F54310A
[    1.109344] dwc2 ff540000.usb: GHWCFG4 @0xF0940050 : 0xC8004030
[    1.489016] dwc2 ff580000.usb: GSNPSID @0xF09C0040 : 0x4F54310A
[    1.489063] dwc2 ff580000.usb: GHWCFG4 @0xF09C0050 : 0xDBF04030

Full register dump at boot (no devices connected) can be found at [1].

> 3. Do you connect any HS HUB between dwc core port and keyboard? Is it
> available connection scenarios when Split traffic generated?

There is actually an HS HUB (FE1_QFP48) between dwc core and keyboard,
I was not aware of it but it is mounted on the board.


[1]. https://gist.github.com/mirzak/a6245dddd4670f3b908a9783f9db8b0d
-- 
Med Vänliga Hälsningar / Best Regards

Mirza Krak
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux