Re: [RFC PATCH 2/3] usb: chipidea: usbmisc: evdo can be set e/o reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jan 13, 2018 at 04:41:47PM +0100, Michael Trimarchi wrote:
> evdo bit can be set or reset. We can not trust evdo bit
> status after bootloader stage
> 
> Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/usb/chipidea/usbmisc_imx.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index a52f5a8..1f47ef6 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -151,14 +151,18 @@ static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
>  	if (data->index)
>  		return 0;
>  
> -	if (data->evdo) {
> -		spin_lock_irqsave(&usbmisc->lock, flags);
> -		reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
> -		val = readl(reg);
> -		writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg);
> -		spin_unlock_irqrestore(&usbmisc->lock, flags);
> -		usleep_range(5000, 10000); /* needed to stabilize voltage */
> -	}
> +	spin_lock_irqsave(&usbmisc->lock, flags);
> +	reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
> +	val = readl(reg);
> +
> +	if (data->evdo)
> +		val |= MX25_BM_EXTERNAL_VBUS_DIVIDER;
> +	else
> +		val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER;
> +
> +	writel(val, reg);
> +	spin_unlock_irqrestore(&usbmisc->lock, flags);
> +	usleep_range(5000, 10000); /* needed to stabilize voltage */

Acked-by: Peter Chen <peter.chen@xxxxxxx>

Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux