There are 2 control endpoint structures for DWC3. However, the driver only updates the OUT direction control endpoint structure during ConnectDone event. DWC3 driver needs to update the endpoint max packet size for control IN endpoint as well. If the max packet size is not properly set, then the driver will incorrectly calculate the data transfer size and fail to send ZLP for HS/FS 3-stage control read transfer. The fix is simply to update the max packet size for the ep0 IN direction during ConnectDone event. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 639dd1b163a0..21abea0ac622 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2744,6 +2744,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) break; } + dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket; + /* Enable USB2 LPM Capability */ if ((dwc->revision > DWC3_REVISION_194A) && -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
