On 10/01/18 16:04, Felipe Balbi wrote:
>
> Hi,
>
> Roger Quadros <rogerq@xxxxxx> writes:
>>> Roger Quadros <rogerq@xxxxxx> writes:
>>>> Felipe,
>>>>
>>>> On 10/01/18 15:11, Roger Quadros wrote:
>>>>> The USB PHYs should be requested only once during the life cycle of
>>>>> this driver.
>>>>>
>>>>> As dwc3_core_init() is called during system suspend/resume
>>>>> it will result in multiple calls to dwc3_core_get_phy() which is wrong.
>>>>>
>>>>> To prevent that let's move dwc3_core_get_phy() call
>>>>> outside dwc3_core_init().
>>>>>
>>>>> Fixes: 541768b08a4 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys")
>>>>> Cc: linux-stable <stable@xxxxxxxxxxxxxxx> # >= v4.13
>>>>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>>>>
>>>> FYI. this patch brings the code back to
>>>> revert 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys")
>>>> revert f54edb539c11 ("usb: dwc3: core: initialize ULPI before trying to get the PHY")
>>>>
>>>> So looks like this will break ULPI PHY case?
>>>>
>>>> Where do we initialize ULPI PHY, in dwc3_phy_setup()?
>>>>
>>>> if so then 541768b08a40 breaks the ULPI PHY case as well, right?
>>>
>>> indeed, that commit regressed ULPI PHYs :-(
>>>
>>> Seems like it should be more like below:
>>>
>>> @@ -754,15 +754,15 @@ static int dwc3_core_init(struct dwc3 *dwc)
>>> dwc->maximum_speed = USB_SPEED_HIGH;
>>> }
>>>
>>> - ret = dwc3_core_get_phy(dwc);
>>> + ret = dwc3_phy_setup(dwc);
>>
>> But can we do a dwc3_phy_setup() without doing the soft reset of the controller first?
>
> as long as clocks are running, we can do that, yes.
>
>>> - ret = dwc3_core_soft_reset(dwc);
>>> + ret = dwc3_core_get_phy(dwc);
>>
>> we can get_phy in dwc3_core_init() as it will get called on resume().
>> This was the $subject of this patch.
>
> indeed. thanks :-)
>
oops sorry. I meant we can't call dwc3_core_get_phy() in dwc3_core_init(). :P
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
