Please keep linux-usb on CC. On Wed, Jan 10, 2018 at 10:01:40AM +0100, Max Schulze wrote: > > > Yeah, that's not a CDC device so usb-serial is the right subsystem for > > this one. > > > >>> Yeah, this is expected since you will not be able to do modem control > >>> when using the generic driver. > >>> > >> Strange enough - after said "sudo modprobe usbserial vendor=0x0cad > >> product=0x9011" > >> I can connect to the ttyUSB0 and ttyUSB1 with minicom instead of > >> miniterm.py (which indeed sems broken) - and it works! I get the AT > >> command set I expect. > > That's good to hear. Are both ports usable? > Yes, both working fine. > > > >> So I guess for the time being leave it here - unsupported but somehow > >> working with the usbserial generic driver? > > We should still add your device's id to some driver, so you don't have > > to manually add it every time you want to use it. > Any idea to which? I have no clue. I'd say the option (modem) driver appears to be the best fit (for now) if the device is indeed using standard CDC requests, even though it's a bit of an overkill for these data rates. Can you verify that the device works with the below patch, including changing the modem control signals like your python script did? > > What kind of device is this? > > > It is a Radio Terminal. Via the text-based AT commands you can get > Information about current calls, or send sms-like text messages. > ( > http://www.etsi.org/deliver/etsi_en/300300_300399/30039205/02.02.00_40/en_30039205v020200o.pdf > ) Thanks for the pointer. Johan >From 452b750ef1d5b0ec171f65da75309b634a9cb2e7 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan@xxxxxxxxxx> Date: Wed, 10 Jan 2018 12:53:09 +0100 Subject: [PATCH] USB: serial: option: add id for Motorola Solutions TETRA PEI Add device id for Motorola Solutions TETRA PEI. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Reported-by: Max Schulze <max.schulze@xxxxxxxxx> Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b6320e3be429..b1e2533d19ce 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2054,6 +2054,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ + { USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
