In removal requests, it is necessary to make the corresponding trb disable state (HWO = 1) and dep->queued_requests a corresponding reduction. It is better to use a alone funtion to disable trb (HWO = 0). Signed-off-by: Pengcheng Li <lpc.li@xxxxxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 1e6c42e..273b51d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -707,6 +707,36 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) while (!list_empty(&dep->started_list)) { req = next_request(&dep->started_list); + if (req->trb) { + if (req->num_pending_sgs) { + struct dwc3_trb *trb; + int i = 0; + + for (i = 0; i < req->num_pending_sgs; i++) { + trb = req->trb + i; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } + + if (req->unaligned || req->zero) { + trb = req->trb + req->num_pending_sgs + 1; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } + } else { + struct dwc3_trb *trb = req->trb; + + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + + if (req->unaligned || req->zero) { + trb = req->trb + 1; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } + } + } + dep->queued_requests--; dwc3_gadget_giveback(dep, req, -ESHUTDOWN); } -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html