[PATCH v3 11/16] phy: qcom-qmp: Add register offsets for QMP V3 PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Registers offsets for QMP V3 PHY are changed from
previous versions (1/2), update same in header file.

Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp.h | 149 ++++++++++++++++++++++++++++++++++++
 1 file changed, 149 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d930ca7..f7d4c2a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -134,4 +134,153 @@
 #define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
 #define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
 
+/* Only for QMP V3 PHY - DP COM registers */
+#define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
+#define QPHY_V3_DP_COM_SW_RESET				0x04
+#define QPHY_V3_DP_COM_POWER_DOWN_CTRL			0x08
+#define QPHY_V3_DP_COM_SWI_CTRL				0x0c
+#define QPHY_V3_DP_COM_TYPEC_CTRL			0x10
+#define QPHY_V3_DP_COM_TYPEC_PWRDN_CTRL			0x14
+#define QPHY_V3_DP_COM_RESET_OVRD_CTRL			0x1c
+
+/* Only for QMP V3 PHY - QSERDES COM registers */
+#define QSERDES_V3_COM_BG_TIMER				0x00c
+#define QSERDES_V3_COM_SSC_EN_CENTER			0x010
+#define QSERDES_V3_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_V3_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_V3_COM_SSC_PER1				0x01c
+#define QSERDES_V3_COM_SSC_PER2				0x020
+#define QSERDES_V3_COM_SSC_STEP_SIZE1			0x024
+#define QSERDES_V3_COM_SSC_STEP_SIZE2			0x028
+#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN		0x034
+#define QSERDES_V3_COM_CLK_ENABLE1			0x038
+#define QSERDES_V3_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE		0x040
+#define QSERDES_V3_COM_PLL_IVCO				0x048
+#define QSERDES_V3_COM_LOCK_CMP1_MODE0			0x098
+#define QSERDES_V3_COM_LOCK_CMP2_MODE0			0x09c
+#define QSERDES_V3_COM_LOCK_CMP3_MODE0			0x0a0
+#define QSERDES_V3_COM_LOCK_CMP1_MODE1			0x0a4
+#define QSERDES_V3_COM_LOCK_CMP2_MODE1			0x0a8
+#define QSERDES_V3_COM_LOCK_CMP3_MODE1			0x0ac
+#define QSERDES_V3_COM_CLK_EP_DIV			0x05c
+#define QSERDES_V3_COM_CP_CTRL_MODE0			0x060
+#define QSERDES_V3_COM_CP_CTRL_MODE1			0x064
+#define QSERDES_V3_COM_PLL_RCTRL_MODE0			0x068
+#define QSERDES_V3_COM_PLL_RCTRL_MODE1			0x06c
+#define QSERDES_V3_COM_PLL_CCTRL_MODE0			0x070
+#define QSERDES_V3_COM_PLL_CCTRL_MODE1			0x074
+#define QSERDES_V3_COM_SYSCLK_EN_SEL			0x080
+#define QSERDES_V3_COM_RESETSM_CNTRL			0x088
+#define QSERDES_V3_COM_RESETSM_CNTRL2			0x08c
+#define QSERDES_V3_COM_LOCK_CMP_EN			0x090
+#define QSERDES_V3_COM_LOCK_CMP_CFG			0x094
+#define QSERDES_V3_COM_DEC_START_MODE0			0x0b0
+#define QSERDES_V3_COM_DEC_START_MODE1			0x0b4
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE0		0x0b8
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE0		0x0bc
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE0		0x0c0
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1		0x0c4
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1		0x0c8
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1		0x0cc
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0		0x0d8
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0		0x0dc
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1		0x0e0
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1		0x0e4
+#define QSERDES_V3_COM_VCO_TUNE_CTRL			0x0ec
+#define QSERDES_V3_COM_VCO_TUNE_MAP			0x0f0
+#define QSERDES_V3_COM_VCO_TUNE1_MODE0			0x0f4
+#define QSERDES_V3_COM_VCO_TUNE2_MODE0			0x0f8
+#define QSERDES_V3_COM_VCO_TUNE1_MODE1			0x0fc
+#define QSERDES_V3_COM_VCO_TUNE2_MODE1			0x100
+#define QSERDES_V3_COM_VCO_TUNE_TIMER1			0x11c
+#define QSERDES_V3_COM_VCO_TUNE_TIMER2			0x120
+#define QSERDES_V3_COM_CLK_SELECT			0x138
+#define QSERDES_V3_COM_HSCLK_SEL			0x13c
+#define QSERDES_V3_COM_CORECLK_DIV_MODE0		0x148
+#define QSERDES_V3_COM_CORECLK_DIV_MODE1		0x14c
+#define QSERDES_V3_COM_CORE_CLK_EN			0x154
+#define QSERDES_V3_COM_C_READY_STATUS			0x158
+#define QSERDES_V3_COM_CMN_CONFIG			0x15c
+#define QSERDES_V3_COM_SVS_MODE_CLK_SEL			0x164
+#define QSERDES_V3_COM_DEBUG_BUS0			0x168
+#define QSERDES_V3_COM_DEBUG_BUS1			0x16c
+#define QSERDES_V3_COM_DEBUG_BUS2			0x170
+#define QSERDES_V3_COM_DEBUG_BUS3			0x174
+#define QSERDES_V3_COM_DEBUG_BUS_SEL			0x178
+
+/* Only for QMP V3 PHY - TX registers */
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX		0x044
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX		0x048
+#define QSERDES_V3_TX_DEBUG_BUS_SEL			0x058
+#define QSERDES_V3_TX_HIGHZ_DRVR_EN			0x060
+#define QSERDES_V3_TX_LANE_MODE_1			0x08c
+#define QSERDES_V3_TX_RCV_DETECT_LVL_2			0x0a4
+
+/* Only for QMP V3 PHY - RX registers */
+#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
+#define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
+#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V3_RX_RX_TERM_BW			0x07c
+#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB			0x0c8
+#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB			0x0cc
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d4
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3		0x0d8
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4		0x0dc
+#define QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1	0x0f8
+#define QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x0fc
+#define QSERDES_V3_RX_SIGDET_ENABLES			0x100
+#define QSERDES_V3_RX_SIGDET_CNTRL			0x104
+#define QSERDES_V3_RX_SIGDET_LVL			0x108
+#define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL		0x10c
+#define QSERDES_V3_RX_RX_BAND				0x110
+#define QSERDES_V3_RX_RX_INTERFACE_MODE			0x11c
+
+/* Only for QMP V3 PHY - PCS registers */
+#define QPHY_V3_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V3_PCS_TXMGN_V0				0x00c
+#define QPHY_V3_PCS_TXMGN_V1				0x010
+#define QPHY_V3_PCS_TXMGN_V2				0x014
+#define QPHY_V3_PCS_TXMGN_V3				0x018
+#define QPHY_V3_PCS_TXMGN_V4				0x01c
+#define QPHY_V3_PCS_TXMGN_LS				0x020
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V0			0x024
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0			0x028
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V1			0x02c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1			0x030
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V2			0x034
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2			0x038
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V3			0x03c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3			0x040
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V4			0x044
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4			0x048
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_LS			0x04c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS			0x050
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE		0x054
+#define QPHY_V3_PCS_RX_IDLE_DTCT_CNTRL			0x058
+#define QPHY_V3_PCS_RATE_SLEW_CNTRL			0x05c
+#define QPHY_V3_PCS_POWER_STATE_CONFIG1			0x060
+#define QPHY_V3_PCS_POWER_STATE_CONFIG2			0x064
+#define QPHY_V3_PCS_POWER_STATE_CONFIG4			0x06c
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L		0x070
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H		0x074
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L			0x078
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H			0x07c
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG1			0x080
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG2			0x084
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG3			0x088
+#define QPHY_V3_PCS_TSYNC_RSYNC_TIME			0x08c
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
+#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
+#define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK		0x0b0
+#define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME		0x0b8
+#define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME		0x0bc
+#define QPHY_V3_PCS_FLL_CNTRL1				0x0c4
+#define QPHY_V3_PCS_FLL_CNTRL2				0x0c8
+#define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
+#define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
+#define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
+
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux