The last two remaining drivers (ehci-msm.c and phy-msm-usb.c) that needed this header were recently removed, so delete this now-unused file. Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx> --- include/linux/usb/msm_hsusb_hw.h | 77 ---------------------------------------- 1 file changed, 77 deletions(-) delete mode 100644 include/linux/usb/msm_hsusb_hw.h diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h deleted file mode 100644 index 974c379..0000000 --- a/include/linux/usb/msm_hsusb_hw.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@xxxxxxxxxx> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__ -#define __LINUX_USB_GADGET_MSM72K_UDC_H__ - -/* USB phy selector - in TCSR address range */ -#define USB2_PHY_SEL 0xfd4ab000 - -#define USB_AHBBURST (MSM_USB_BASE + 0x0090) -#define USB_AHBMODE (MSM_USB_BASE + 0x0098) -#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0) -#define ULPI_TX_PKT_EN_CLR_FIX BIT(19) - -#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ - -#define USB_USBCMD (MSM_USB_BASE + 0x0140) -#define USB_PORTSC (MSM_USB_BASE + 0x0184) -#define USB_OTGSC (MSM_USB_BASE + 0x01A4) -#define USB_USBMODE (MSM_USB_BASE + 0x01A8) -#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) -#define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) - -#define GENCONFIG_2_SESS_VLD_CTRL_EN BIT(7) -#define USBCMD_SESS_VLD_CTRL BIT(25) - -#define USBCMD_RESET 2 -#define USB_USBINTR (MSM_USB_BASE + 0x0148) - -#define PORTSC_PHCD (1 << 23) /* phy suspend mode */ -#define PORTSC_PTS_MASK (3 << 30) -#define PORTSC_PTS_ULPI (2 << 30) -#define PORTSC_PTS_SERIAL (3 << 30) - -#define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170) -#define ULPI_RUN (1 << 30) -#define ULPI_WRITE (1 << 29) -#define ULPI_READ (0 << 29) -#define ULPI_ADDR(n) (((n) & 255) << 16) -#define ULPI_DATA(n) ((n) & 255) -#define ULPI_DATA_READ(n) (((n) >> 8) & 255) - -/* synopsys 28nm phy registers */ -#define ULPI_PWR_CLK_MNG_REG 0x88 -#define OTG_COMP_DISABLE BIT(0) - -#define ULPI_MISC_A 0x96 -#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) -#define ULPI_MISC_A_VBUSVLDEXT BIT(0) - -#define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ -#define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ -#define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ -#define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */ - -/* OTG definitions */ -#define OTGSC_INTSTS_MASK (0x7f << 16) -#define OTGSC_ID (1 << 8) -#define OTGSC_BSV (1 << 11) -#define OTGSC_IDIS (1 << 16) -#define OTGSC_BSVIS (1 << 19) -#define OTGSC_IDIE (1 << 24) -#define OTGSC_BSVIE (1 << 27) - -#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */ -- 2.9.1.200.gb1ec08f -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
