On Tue, Oct 24, 2017 at 02:06:08PM +0800, Yu Chen wrote:
> DT bindings for usb of Hikey960.
>
> Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
> Signed-off-by: Ning Fan <fanning4@xxxxxxxxxxxxx>
> Signed-off-by: Di Yang <yangdi10@xxxxxxxxxxxxx>
> Signed-off-by: Rui Li <lirui39@xxxxxxxxxxxxx>
>
> ---
> .../devicetree/bindings/usb/hisilicon-usb.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/hisilicon-usb.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/hisilicon-usb.txt b/Documentation/devicetree/bindings/usb/hisilicon-usb.txt
> new file mode 100644
> index 000000000000..dc4c460885d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/hisilicon-usb.txt
Should be 3660 specific?
> @@ -0,0 +1,38 @@
> +* HISILICON USB HUB
Looks like a controller, not a hub?
> +
> +Required properties:
> +- compatible: One of the specific types :"hisilicon,hi3660-dwc3",
> + "hisilicon,gpio_hubv1","hisilicon,gpio_hubv2"
What are these?
> +
> +Optional properties of devices using ISP1301:
> +- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the
> + ISP1301 instance associated with the respective USB driver
Really? A full-speed transceiver?
> +
> +Example:
> +
> + hisi_usb@ff200000 {
usb@...
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "hisilicon,hi3660-dwc3";
> + reg = <0x0 0xff200000 0x0 0x1000
> + 0x0 0xff100000 0x0 0x100000>;
> + ranges;
> + bc_again_flag = <0>;
Not documented. Don't use '_' in property names.
> +
> + clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
> + <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
> + clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
> + eye_diagram_param = <0x1c466e3>;
> + eye_diagram_host_param = <0x1c466e3>;
> + usb3_phy_cr_param = <0xb80>;
> + usb3_phy_host_cr_param = <0x980>;
> + usb3_phy_tx_vboost_lvl = <0x5>;
All of these have to be documented.
> +
> + dwc3@ff100000 {
Ah, it's a DWC3 controller. No references to the common binding?
> + compatible = "snps,dwc3";
> + reg = <0x0 0xff100000 0x0 0x100000>;
> + interrupts = <0 159 4>, <0 161 4>;
> + dr_mode = "otg";
> + maximum-speed = "super-speed";
> + };
> + };
> \ No newline at end of file
Fix what it says here.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
