On 10/24/2017 1:33 AM, John Stultz wrote:
> It has been noticed that the dwc2 udc state reporting doesn't
> seem to work (at least on HiKey boards). Where after the initial
> setup, the sysfs /sys/class/udc/f72c0000.usb/state file would
> report "configured" no matter the state of the OTG port.
>
> This patch adds a call so that we report to the UDC layer when
> the gadget device is disconnected.
>
> This patch does depend on the previous patch ("usb: dwc2:
> Improve gadget state disconnection handling") in this patch set
> in order to properly work.
>
> Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx>
> Cc: Guodong Xu <guodong.xu@xxxxxxxxxx>
> Cc: Amit Pundir <amit.pundir@xxxxxxxxxx>
> Cc: YongQin Liu <yongqin.liu@xxxxxxxxxx>
> Cc: John Youn <johnyoun@xxxxxxxxxxxx>
> Cc: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Cc: Chen Yu <chenyu56@xxxxxxxxxx>
> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Tested by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
> Reported-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> ---
> drivers/usb/dwc2/gadget.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 7fd0e38..603c216 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3202,6 +3202,8 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg)
>
> call_gadget(hsotg, disconnect);
> hsotg->lx_state = DWC2_L3;
> +
> + usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED);
> }
>
> /**
>
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
Tested-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
