[RFC 3/3] arm64: dts: Modify device tree for support Hikey960

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add dts for usb module of Hikey960.

Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
Signed-off-by: Ning Fan <fanning4@xxxxxxxxxxxxx>
Signed-off-by: Di Yang <yangdi10@xxxxxxxxxxxxx>
Signed-off-by: Rui Li <lirui39@xxxxxxxxxxxxx>

---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 39 +++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index b7a90d632959..dff3e68c5e38 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -324,6 +324,18 @@
 			status = "disabled";
 		};
 
+		hubv2: gpio_hubv2 {
+			compatible = "hisilicon,gpio_hubv2";
+			typc_vbus_int_gpio,typec-gpios = <&gpio25 2 0>;
+			typc_vbus_enable_val = <1>;
+			otg_gpio = <&gpio25 6 0>;
+			hub_vdd12_en_gpio = <&gpio2 1 0>;
+			hub_vdd33_en_gpio = <&gpio5 6 0>;
+			hub_reset_en_gpio = <&gpio4 4 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbhub5734_pmx_func>;
+		};
+
 		i2c3: i2c@fdf0c000 {
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0xfdf0c000 0x0 0x1000>;
@@ -978,5 +990,32 @@
 			clocks = <&crg_ctrl HI3660_OSC32K>;
 			clock-names = "apb_pclk";
 		};
+
+		hisi_usb@ff200000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "hisilicon,hi3660-dwc3";
+			reg = <0x0 0xff200000 0x0 0x1000
+				 0x0 0xff100000 0x0 0x100000>;
+			ranges;
+			bc_again_flag = <0>;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+			eye_diagram_param = <0x1c466e3>;
+			eye_diagram_host_param = <0x1c466e3>;
+			usb3_phy_cr_param = <0xb80>;
+			usb3_phy_host_cr_param = <0x980>;
+			usb3_phy_tx_vboost_lvl = <0x5>;
+
+			dwc3@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+				interrupts = <0 159 4>, <0 161 4>;
+				dr_mode = "otg";
+				maximum-speed = "super-speed";
+			};
+		};
 	};
 };
-- 
2.11.GIT


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux