Hi, please see comments below for some nit-picks. On 10/22/2017 10:38 PM, Serge Semin wrote:
There are USB2517 and USB2517i hubs, which have almost the same registers space as already supported USB251xBi series. The difference it in DIDs and in a few functions. This patch adds the USB2517/i data structures to the driver, so it would have different setting depending on the device discovered on i2c-bus. Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx> --- drivers/usb/misc/Kconfig | 4 ++-- drivers/usb/misc/usb251xb.c | 23 +++++++++++++++++++++-- 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 37dd1c018..27b9fcbdf 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -247,8 +247,8 @@ config USB_HUB_USB251XB depends on I2C help This option enables support for configuration via SMBus of the - Microchip USB251xB/xBi USB 2.0 Hub Controller series. - Configuration parameters may be set in devicetree or platform data. + Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration + parameters may be set in devicetree or platform data.
Here you have "USB251x/xBi"...
Say Y or M here if you need to configure such a device via SMBus.config USB_HSIC_USB3503diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 91f66d68b..22c32ea3f 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c
...
@@ -82,7 +83,7 @@#define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14#define USB251XB_ADDR_PRODUCT_STRING 0x54 -#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi" +#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi/7i"
but here you have "USB251xB/xBi/7i"...
#define USB251XB_ADDR_SERIAL_STRING_LEN 0x15#define USB251XB_ADDR_SERIAL_STRING 0x92
...
@@ -590,5 +609,5 @@ static struct i2c_driver usb251xb_i2c_driver = { module_i2c_driver(usb251xb_i2c_driver);MODULE_AUTHOR("Richard Leitner <richard.leitner@xxxxxxxxxxx>");-MODULE_DESCRIPTION("USB251xB/xBi USB 2.0 Hub Controller Driver"); +MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
... and here again "USB251x/xBi"...
MODULE_LICENSE("GPL");
I'd prefer to use just one "name" for the driver. If you be precise that would be "USB251xB/xBi/xi". But that seems a bit overloaded to me. AFAIK the "B" and "i" prepended to the type have no affect on the I2C interface/register map, so maybe "USB251x" would be sufficient?
kind regards, Richard.L -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
