Adds support for devicetree to the max3421 driver. Signed-off-by: Jules Maselbas <jules.maselbas@xxxxxxxxxxxxxxxx> --- drivers/usb/host/max3421-hcd.c | 75 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 74 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index 0ece9a9341e5..d77b3f27c6e7 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -60,6 +60,7 @@ #include <linux/spi/spi.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/of.h> #include <linux/platform_data/max3421-hcd.h> @@ -85,6 +86,8 @@ USB_PORT_STAT_C_OVERCURRENT | \ USB_PORT_STAT_C_RESET) << 16) +#define MAX3421_GPOUT_COUNT 8 + enum max3421_rh_state { MAX3421_RH_RESET, MAX3421_RH_SUSPENDED, @@ -1672,7 +1675,7 @@ max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value) u8 mask, idx; --pin_number; - if (pin_number > 7) + if (pin_number >= MAX3421_GPOUT_COUNT) return; mask = 1u << (pin_number % 4); @@ -1831,11 +1834,35 @@ static const struct hc_driver max3421_hcd_desc = { .bus_resume = max3421_bus_resume, }; +static int +max3421_of_vbus_en_pin(struct device *dev, struct max3421_hcd_platform_data *pdata) +{ + int retval; + uint32_t value[2]; + + if (!pdata) + return -EINVAL; + + retval = of_property_read_u32_array(dev->of_node, "maxim,vbus-en-pin", value, 2); + if (retval) { + dev_err(dev, "device tree node property 'maxim,vbus-en-pin' is missing\n"); + return retval; + } + dev_info(dev, "property 'maxim,vbus-en-pin' value is <%d %d>\n", value[0], value[1]); + + pdata->vbus_gpout = value[0]; + pdata->vbus_active_level = value[1]; + + return 0; +} + static int max3421_probe(struct spi_device *spi) { + struct device *dev = &spi->dev; struct max3421_hcd *max3421_hcd; struct usb_hcd *hcd = NULL; + struct max3421_hcd_platform_data *pdata = NULL; int retval = -ENOMEM; if (spi_setup(spi) < 0) { @@ -1843,6 +1870,40 @@ max3421_probe(struct spi_device *spi) return -EFAULT; } + if (!spi->irq) { + dev_err(dev, "Failed to get SPI IRQ"); + return -EFAULT; + } + + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + retval = -ENOMEM; + goto error; + } + retval = max3421_of_vbus_en_pin(dev, pdata); + if (retval) + goto error; + spi->dev.platform_data = pdata; + } + + pdata = dev->platform_data; + if (!pdata) { + dev_err(dev, "driver configuration data is not provided\n"); + retval = -EFAULT; + goto error; + } + if (pdata->vbus_active_level > 1) { + dev_err(dev, "vbus active level value %d is out of range (0/1)\n", pdata->vbus_active_level); + retval = -EINVAL; + goto error; + } + if (pdata->vbus_gpout < 1 || pdata->vbus_gpout > MAX3421_GPOUT_COUNT) { + dev_err(dev, "vbus gpout value %d is out of range (1..8)\n", pdata->vbus_gpout); + retval = -EINVAL; + goto error; + } + hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev, dev_name(&spi->dev)); if (!hcd) { @@ -1885,6 +1946,11 @@ max3421_probe(struct spi_device *spi) return 0; error: + if (IS_ENABLED(CONFIG_OF) && dev->of_node && pdata) { + devm_kfree(&spi->dev, pdata); + spi->dev.platform_data = NULL; + } + if (hcd) { kfree(max3421_hcd->tx); kfree(max3421_hcd->rx); @@ -1929,11 +1995,18 @@ max3421_remove(struct spi_device *spi) return 0; } +static const struct of_device_id max3421_of_match_table[] = { + { .compatible = "maxim,max3421", }, + {}, +}; +MODULE_DEVICE_TABLE(of, max3421_of_match_table); + static struct spi_driver max3421_driver = { .probe = max3421_probe, .remove = max3421_remove, .driver = { .name = "max3421-hcd", + .of_match_table = of_match_ptr(max3421_of_match_table), }, }; -- 2.14.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html